Jaspers Holders 30B

162

Holder

  • Length: 30 cm
  • Load capacity: up to 15 kg (extendable with shelf reinforcement up to 40 kg load capacity - not included)
  • With stoppers and two-part tube clamps
  • Can be mounted anywhere without dismantling the stand
  • Material: Powder-coated aluminium
  • Colour: Black
  • Scope of delivery: 1 pair
Produkt dostępny od Luty 2007
Numer artykułu 109854
Jednostka sprzedaży 1 szt.
Type Of Keyboard Stand Extension
Colour Black
169 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Czwartek, 2.05.
1

162 Oceny klientów

4.8 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

stabilność

wykończenie

64 Opinie

L
Too bad not included
LookAlive 24.11.2023
Should be included with Jasper 3d-105b because the ones you get go pretty far and i needed short ones for smaller synths.
stabilność
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

T
Great part of great system
Twaroshinto 11.05.2023
It is a great shelf for great system stand. Only thing is that provided foam pads are quite soft and get damaged easily.
stabilność
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
i
If you're reading this, you probably need these.
infindebula 14.09.2021
I think all the Jaspers stands already come with these holders, so their function should be no mystery.

My only gripe is the little hooks on the end - they are generally fine, but not quite long enough for certain keyboards. For example, the Akai AX60 has an angled lower chassis, so the hooks do not quite come up high enough to hold the keyboard in place. I own a few other vintage keyboards with a similar slope on the bottom, but I haven't tried them yet. I think the Korg DW series and Poly-800 may have similar trouble.

I was able to correct this by replacing the hooks with 1/4 x 3/4 inch aluminum bar stock. I cut the bar to about 65 mm in length, then drilled and countersunk a hole for the screw, and finally spray painted the pieces black. It was a lot of work, but it fixed the problem.

I'm rating these holders 5 stars for stability and quality, but only 4 total because they are not suitable for all keyboards, and Jaspers does not offer longer hooks for the end of the holders.
stabilność
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
TP
Simple and effective
The Professor 06.05.2020
These neat little equipment arms bolt on to your existing Jaspers keyboard stand so you can, uh, stand more keyboards. In my case I'm actually using them for a variety of other kit, like some of the heftier old drum machines, an Akai sampler or two, and the like; so I've got four pairs of these spanning one tier of a multi-tier stand. They work very well and the friction grips can be entirely opened, allowing you to attach them to the stand without disassembling it (which is a relief). Not exactly exciting, but very handy, and the build quality is excellent.
stabilność
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie