C
NIce replacement for cheaper Hofner basses
I ordered these tuning machines to replace the stock tuners on a Hofner Ignition Club Bass, since the original felt really cheap and clumsy. These are supposed to be the ones that go on the expensive German Hofner basses, and even they still look like guitar tuners with a plain open mechanism, they are well made and feel smooth and steady.
It's worth noting that they come with bushings and mounting screws, as a set (I was not sure because it is not mentioned in the product description).
Keep in mind though that it is not a direct replacement for an Ignition bass: some minor work has to be done in order to accomodate these tuners. The bushings are slightly larger in diameter, so the holes on the Ignition headstock need to be widened (about 1mm). Then, one of the mounting screws fits one of the existing holes, but for the other screw it's necessary to drill a new guide hole.
It's worth noting that they come with bushings and mounting screws, as a set (I was not sure because it is not mentioned in the product description).
Keep in mind though that it is not a direct replacement for an Ignition bass: some minor work has to be done in order to accomodate these tuners. The bushings are slightly larger in diameter, so the holes on the Ignition headstock need to be widened (about 1mm). Then, one of the mounting screws fits one of the existing holes, but for the other screw it's necessary to drill a new guide hole.
7
1
Zgłoś nadużycie
A
Beatles Bass Upgrade
I have fitted these to my Ignition Beatles Bass as a direct replacement for the ones it comes installed with.
As other reviewers state you will have to drill one pilot hole per machine head and half of the unused hole from the previous machine heads will be showing.
I have chosen to leave this hole unfilled and unpainted as you cannot see it unless you know its there or you are scrutinising it very closely.
You do not need to install the machine head peg guides (metal sleeves) that come with these but if you want to fit them you will need to drill the peg guide holes out to fit them (more work than is necessary in my view).
They are an excellent replacement being manufactured of higher quality metals that are not loose like the original machine heads.
As other reviewers state you will have to drill one pilot hole per machine head and half of the unused hole from the previous machine heads will be showing.
I have chosen to leave this hole unfilled and unpainted as you cannot see it unless you know its there or you are scrutinising it very closely.
You do not need to install the machine head peg guides (metal sleeves) that come with these but if you want to fit them you will need to drill the peg guide holes out to fit them (more work than is necessary in my view).
They are an excellent replacement being manufactured of higher quality metals that are not loose like the original machine heads.
4
0
Zgłoś nadużycie
C
Perfect and authentic quality
I used the Höfner 63 H61/73B tuners for a Hofner "1963" bass-guitar restoration project and they where a perfect match in style (looked the same and had the same measurements). Also the quality is sublime, they used some good materials for the knobs and gears and it runs smoothley. And the most important thing:"they stay perfectly in tune"
1
0
Zgłoś nadużycie
V
Original is original
This tuning pegs are of course original and very good manufactured, I have bought for my Hofner 66 501/1, they are amazing.
0
0
Zgłoś nadużycie
JR
Nice machine heads
I was replacing the machine heads on a Hofner Contemporary Bass (one of them broken, the button had snapped) and these one's are great, much nicer looking, one of the heads was a little stiffer to turn but worked fine, I had to drill new holes for the screws and fill the old holes with epoxy.
3
0
Zgłoś nadużycie
R
Excellent Hofner tuners.
These are great if you need authentic tuners for your Hofner or are doing a quality upgrade on your Hofner clone. They are very good value for money when bought from Thomann as opposed to the specialist Hofner internet companies you find on the web.
1
0
Zgłoś nadużycie
K
Great replacement tuners
I bought this for my Hofner Ignition violin bass as the stock tuners are not good enough (one of the broke while I was tuning the bass!). I installed this ones and it looks much more roboust than the original ones which I had on the Hofner Ignition violing bass.
1
0
Zgłoś nadużycie
A
Great Hofner spare parts!
I'm very happy with those machine heads. Great quality!
0
0
Zgłoś nadużycie
R
Höfner 63 H61/73B Tuners
Purchased these as part of the upgrade to my HCT Contemporary. Nicely made and give it that "Made in Germany" finish.
0
0
Zgłoś nadużycie
