Gravity MA TRAY 3

87

Tray

  • Suitable for mounting on guitar stands and microphone stands with diameters from 15 - 35 mm
  • Inclinable up to 180°
  • Recesses on edge for practical cable guiding
  • Ergonomic handling
  • Material: Polyamide plastic
  • Material (incline adjustment): Steel
  • Dimensions of tray surface (W x D): 220 x 145 mm
  • Weight: 0.258 kg
  • Colour: Black
Produkt dostępny od Marzec 2021
Numer artykułu 512539
Jednostka sprzedaży 1 szt.
55 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Poniedziałek, 29.04.
1

87 Oceny klientów

4.5 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

montaż

stabilność

wykończenie

54 Opinie

A
Podstawka
AndrewCichy 04.08.2023
Zamówiłem ta podstawkę jako uzupełnienie statywu oraz pulpitu pod nuty. Element jest wykonany bardzo dobrze, zacisk jest stabilny co pozwala na umieszczenie nie tylko telefonu na tej podstawce. Polecam ten element jako uzupełnienie statywu lub pulpitu.
montaż
wykończenie
stabilność
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
C
Useful but not very resistant
Cranio 13.09.2021
I bought the tray to use it for a very small looper/sampler. The tray itself does it job, it has a clamp with rubber inside to be clamped on a mic stand, and the clamp seems of decent quality.
By disassembling the piece that inserts into the clamp, it's possible also to force the tray to a certain angle (but only on that side), but you will need a hex key to set the new angle.
The angle is set through a pin that goes in radially spaced holes in the plastic, sadly this system is not very sturdy, it broke right after the first live (two holes are now conjoined as the separation between them broke, so the tray wiggles).
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
ÁS
Utter piece of junk!
Árni Sigurðsson 20.06.2023
Just got one, the clamp and the table itself seems nice enough, but the tilting mechanism is total crap. I took it out of the package and was messing around with it, seeing how it works and titled it and it never really was stable again.

The nut that holds it together just slips out of the plastic if you try to make it tight. I ended up drilling a hole and put a 3mm screw and nut to keep it together. Seems much better now!

Tilt is a very unnecessary feature and it would be a decent product without it.
montaż
wykończenie
stabilność
1
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
B
Gravity MA TRAY 3
BT 24.06.2021
It's Ok, useful for light things. Thanks
0
0
Zgłoś nadużycie

Zgłoś nadużycie