Graph Tech Trem Nut PT 1200

126

Nut for 4-String Basses

  • Dimensions 41.02 x 4.62 x 8.84 mm
  • Notched
Produkt dostępny od Marzec 2012
Numer artykułu 280511
Jednostka sprzedaży 1 szt.
Width in mm 41 mm
Unmachined No
Instrument 4-String Bass
72 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Szacowana dostawa pomiędzy Środa, 15.05. and Czwartek, 16.05.
1

126 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

47 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
t
Top quality but uncommon size
taddeomaiden 01.01.2018
The nut is great as any other Graph Tech product: good material, enhances the tone and stabilizes the tuning, but it will require some extremely accurate work to fit a P bass.
The length and the string spacing are correct, but it's very much higher and deeper than a normal P bass nut, so it will need a lot of sanding.
However, the major letdown is that it's flat-bottomed, unlike a standard Fender nut, and that complicates the installation a lot.
So my advice is: buy it if you're going to install it behind the fretboard, skip it if it's for a Fender-type bass 'cause installing it will be too much of a hassle and if you're not VERY careful you'll ruin the nut and need to buy another one.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
P
Great replacement for the Thomann short scale bass
Pete-plays-guitar 14.05.2018
I really love the Thomann short scale bass, but the white plastic nut it comes with is really nasty and cheap. This nut is the perfect width for it.

I had to increase the width of nut slot with careful filing, but this nut is so much better and the bass seems to have much more sustain (I don't think it is just my imagination).

The nut iutself is quite deep, so whichever bass you need it for, it will require a substantial sanding down, but better there being too much which you can work with rather than too less.

The material feels like it is going to last, and from the sanding process to bring the heigth down, it comes across as a quite dense material.

So far, no problems, so I can highly recommend it.
wykończenie
1
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
m
Jamais rien a redire avec Graphtech.
marco_elwray 16.02.2022
Si on choisit bien son sillet, un Graph Tech est toujours l'assurance d'un produit de haute qualité.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
M
sounds good but the D slot is deeper than the other ones (that's a NO GO!)
McKind 13.11.2022
As my first bass turned 33 years old, it deserved some refurbishing. Last not least, the nut was about to turn into dust. Actually, when I unglued it, it broke into 3 pieces...
Anyway, I took all the measurements, filed the new nut according to the neck radius and the desired height and glued it in place. When I restringed the bass, I immediately realized that the D string was lying way below the other three. After a couple of plucks, the impression was confirmed and the D string is unplayable (it keeps banging against the first fret when playing the empty string).
That's a pity because it sounds very good, way better than before (OK, the old cracked nut is not a proper reference here...) adding a lot of sustain.
I haven't sent it back because I modified it (N.B. I didn't touch the slots!), but eventually it turned into a waste of money.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie