Göldo TLB2C String Bushing Bass

26

Tail Sleeve for Bass

  • Diameter: 9.5 mm
  • Colour: Nickel
Produkt dostępny od Luty 2014
Numer artykułu 334754
Jednostka sprzedaży 1 szt.
8,10 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Wtorek, 30.04.
1

26 Oceny klientów

4.8 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

9 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
DB
Simple yet Elegant
David B. 6946 08.04.2018
These were bought for a Harley Benton PB-50 mod project. Iwas going for the original 50's look so string through body was a must.

Since the PB-50 was ordered from Thomann it made sense to order the bushings too. The price was also better than I could find in the UK.

Very easy to fit. Once I'd position my 2 saddle bridge I bored pilot holes then flipped the bass over. A 9.5mm countersink finished the drilling. A tap with a rubber mallet saw the bushings secure.

If you want the bushings lying flush with the back of the body use a 12.5mm flat bit to the depth required (2mm I found) before using the countersink.

No "cons" were discovered. It's a very simple product that works well. Highly recommended.

You can see the finished PB-50 on bassic.de, basschat.co.uk, onlybass.com and talkbass.com. look for posts by kodiakblair.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
S
Solid and well made.
SeanMandrake 08.09.2015
Sturdy. Good quality. Appears to be a brightly plated brass. Ideal for an upgrade or, as in my case; retrofitting a bass string to a guitar. Only as deep as it needs to be so should fit thinner bodies well.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie