Göldo EL900 Profi Shield Screen

594

Shielding Set

  • To shield pickguards, pickups and electrical components
  • 2 x Self-adhesive copper foil 127 x 180 mm
  • 1 x Self-adhesive copper foil 30 x 350 mm
  • 1 x Self-adhesive copper foil 12 x 500 mm
  • Cable 2-pin 50 cm
  • Stranded wire 25 cm
  • Solder wire 50 cm
  • Isolating tape sections
  • Instructions
Produkt dostępny od Październik 2006
Numer artykułu 199152
Jednostka sprzedaży 1 szt.
72 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Wtorek, 30.04.
1

594 Oceny klientów

4.4 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

272 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
V
Excellent kit!
Vepar 15.07.2020
Excellent shielding kit! Very simple to use, and the different sizes really help in shielding the tricky spots. The glue is conductive and multimeter shows continuity if you overlap it. Comes with wires and solder. Everything i needed to shield my guitar and redo all the connections. I got two kits because i have a Jazzmaster and the cavity is pretty huge, but for a Strat, Tele, or any other guitar with just the pickup and back cavities like Gibson, one kit will be enough. The shielded wire is ok, but the other wire they provide could have been a bit thicker, seems kinda weak but works flawlessly. The only other downside is the instructions are only in german. So they were useless to me. It should at least be also in english, even if they just google translate it, it would be better than nothing. But there's youtube videos everywhere about shielding so you don't really need a piece of paper to tell you how to do it. Still, they might have their own special way of doing it but i'd never know that because of one language instructions. Instructions or not, this is a great product for the price!
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
Nt
Shield screen
Nick thomaidis 27.11.2021
Very nice kit but not enough material
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
B
Good conductive characteristics
BB75 12.01.2020
The cooper tape is very good with regards to conductivity and gluing. It's very easy to install and even if you overlap it it still maintains conductivity.
The only minor point was the way the several portions were cut, it wasn't easy to adapt it to a SSS Stratocaster body and nearly wasn't enough for everything. I mean, if it has different types of cut you expect then to be suiting a guitar, in reality nothing was said about being for a Stratocaster body.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
bit short on material
Anonimowy 23.06.2014
THe material were all fine and worked well. But I used this for the internal cavity of a Jazzmaster (which has a slightly large body than a strat/tele) - there was not enough foil to do the whole cavity. Frankly I though that was a bit cheap given that it would cost a minimal amount to give a bit of room to move with the foil. Because there is a relatively small amount it could mean having to buy two packs.
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie