Göldo 500K log Mini Pot

331

Pot for Electric Guitar or Bass

  • Manufacturer designation: E500M
  • Small size
  • Housing diameter: 16.5 mm
  • Resistance: 500 kOhm
  • Resistance curve: logarithmic
  • Axle: coarsely fluted slotted axle (18 teeth for imported guitars & potentiometer knobs)
  • Thread diameter: 8 mm
  • Thread length: 10 mm
Produkt dostępny od Kwiecień 2006
Numer artykułu 192488
Jednostka sprzedaży 1 szt.
Design Tone
Resistance Value 500 kOhms
Characteristic Curve Logarithmic
Thread Length 10,0 mm
Tandem Poti No
Push/Push No
Solderless No
shaft type grooved
12,40 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Rabat ilościowy
Cena jednostkowa Oszczędzasz Ilość
12,40 zł 1
11,89 zł 4,1% 4
11,29 zł 9,0% 8
10,79 zł 13,0% 12
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Wtorek, 30.04.
1

331 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

102 Opinie

P
Pietrosz 25.12.2018
Swietny produkt. Cena do jakosci? Polecam.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
S
Don't let the low price put you off
Sinest 12.09.2020
I used these on a Aria Pro II L5 style hollowbody guitar, to replace the old scratchy pots , 1 of which was completely dead so I had no sound on the neck pickup.
I wanted full size pots, but they did not fit on that particular guitar because of the small F-holes.
On the multimeter they measured from 485K to 530K which I think is great. I've seen CTS pots that are way worse off spec than these.
The taper also is nice and gradual.
They dont feel too loose like CTS but neither too stiff and slow to turn like Alphas. Just make sure you don't cook them with the soldering gun, then the soft feeling will go away and the pot might be ruined completely.
The shaft, axle and nuts could be made out of brass or something more sturdy, but they work fine anyway, just do not overtighten them.
For metric-mini-pots, that is my choice and I recommend them.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
P
Alright
Perwanie 01.05.2018
So these potmeters are good, easly to place and work smoothly.


Pros:
Cheap
Quality
Smooth running
Clear tone
Easy to assemble
Nice grip

Cons
The tone compared to fender pots are not as deep, but on the listening ear theres not too much difirence.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
D
Nice mini pot
DominikZ 17.08.2015
The operation is very smooth and slightly on the light side (which some will like and some won't). There is no unwanted noise from operation out of the box, but we'll see how it will hold up in the long run. It is a small body size pot, so it will fit in tighter spaces than a larger size pot. All in all, you can't really expect much more from a potentiometer :)
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie