Fender Vintage P-Bass Bridge Cover

212 Oceny klientów

4.7 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

103 Opinie

Fender Vintage P-Bass Bridge Cover
127 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Poniedziałek, 29.04.
1
google translate gb
Wystąpił błąd. Proszę spróbować później.
S
ao
Savio2000 27.08.2019
it surprised me, i was not expecting so much quality from this little known company known as fender, but it's frank zappa tengo una ...... tanta level of quality. Ao!
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
T
Very inconsisten quality
TrEr 07.12.2019
These Fender bridge covers really are luck of the draw. Some have a nasty ringing noise that will actually be heard when playing specific notes. I got this one to replace a particularly bad one. This one was very much middle-of-the-road. Not the worst I've heard but not the best either. I had to use a thin layer of foam UNDER the cover (between body and cove) to dampen the ringing.

It got slightly better than the old one but I really don't understand why Fender can't manufacture these to a higher consistency. Because some of the older ones I've got have far less ringing.

They look cool though, if that's the kind of vibe you're looking for. And there aren't really any better alternatives so I guess they're ok.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
B
Perfect fit
Bassface1 05.12.2021
I was ordering some parts for a reissue I got recently and needed the covers. Perfect fit, high quality Fender original parts were the only way to go. Very happy with the quality and it keeps my Fender a Fender.
wykończenie
0
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
BT
Recommended
Bruce Thumper 19.10.2017
Adds a retro look to my bass. Been on the bass for a while now and showing no sign of tarnishing or discolouring. Screws are not supplied however, and I found it a little difficult to find screws of the right size and that match the appearance of screws already on the bass.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
K
Cool and shiny cover!
KeithR 14.05.2013
I bought this for a Fender '62 reissue P Bass project and also bought some Fender mute foam to stick inside it. Gives me that '60s Motown tone perfectly and looks very retro cool whilst doing it!
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Overpriced
Algirdas 21.05.2013
As you'd expect from Fender, this is a highly overpriced accessory. Sure, the quality is good and the plating is decent but it is certainly not worth the price. Next time I will shop around for a cheaper alternative. Of course, if you need an accurate retrofit for one of the vintage P-Basses in your collection, then this might be the most period-correct choice, but if all you need is a quality bridge cover, it is worth looking around for cheaper alternatives that aren't as overpriced as this one. I don't know about you but I hate supporting corporations that raise their prices to ridiculous heights without a good reason.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Looks good, feels good.
Anonimowy 16.07.2014
I bought this to add to the vintage mojo of my 57 reissue P bass.

Not much you can say about it other than it was perfect right out of the pack, the screws are also of good quality, I have found the cheaper knock off bridge covers often come with cheap nasty screws that the heads grind out while putting it on making it a pig to take off.

Plating perfect all over as well so it doesn't make any scratches on the finish where you put it on.

No sharp edges if you rest your hand on it and looks great.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
Tf
Great for my use.
Tim from UK 08.09.2017
I use this to keep the foam damping in place for my old precision. The resulting sound is really old school soul and for certain styles is perfect.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Vintage look
Anonimowy 17.12.2015
Really nice if you want to give your P-bass that vintage look!
Very solid piece of metal, on the downside, mine came with some minor, superficial scratches on it. It doesn't really matter because it's going to get scratched anyway, but since it's not THAT cheap, it would have been nice to get it in mint condition.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
ed
Originals
ed den ted 26.02.2019
Nothing compares to original parts when we are talking about Fender !
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

Fender Vintage P-Bass Bridge Cover