Fender Sub-Sonic Baritone Tele Neck

3

Neck for Baritone Electric Guitar

  • Baritone Telecaster model
  • Material: Maple
  • 22 Medium jumbo frets
  • Neck profile: C
  • Maple fingerboard
  • Fretboard radius: 241 mm (9.5")
  • Synthetic bone nut
  • Nut width: 42 mm (1.650")
  • Scale: 686 mm (27")
  • Neck fastening with 4 screws
  • Neck thickness at 1st fret 21.08 mm (.830"), from 12th fret 22.86 mm (.900")
Produkt dostępny od Luty 2023
Numer artykułu 560882
Jednostka sprzedaży 1 szt.
Model T-Style
Strings (Number) 6
Material Neck Maple
Material Fingerboard Maple
Mensur (in mm) 686 mm
Nut Width (in mm) 42 mm
Frets / Location (Number) 22
Fretless No
Varnished Yes
1 490 zł
darmowa wysyłka, zawiera podatek VAT.
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Piątek, 3.05.
1

3 Oceny klientów

4.7 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

3 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
C
Telecaster Baritone Conversion Neck
Cozaru 15.03.2024
Good conversion baritone neck. Frets are fairly good, although they could do with some recrowning and polishing. Holes may need drilling slightly to open them up enough for screws, as mine did.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
j
Passt perfekt
jensemann68 13.07.2023
Ich habe aus einer Player Telecaster eine Baritone geaut und dafür den Baritone-Hals bestellt. Es ist so cool, dass ich das Ding anschrauben und besaiten konnte, ohne viel verändern zu müssen. Es passte alles millimetergenau. Dass der Hals von der Qualitüt her über jeden Zweifel erhaben ist, erklärt sich ja fast von selbst. Ich benötige zwar gerade keine zweite Baritone, aber wenn ich eine bräuchte, würde ich wieder diesen Hals wählen.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate dk
Wystąpił błąd. Proszę spróbować później.
I
Turn your old Fender into a new baritone!
Iversen67 17.07.2023
This is a great and simple idea: Turn any of your strats or teles into a baritone with an original neck from Fender themselves. I had two ordinary Baja telecasters. I now have an ordinary one and a baritone.

I had my luthier install the neck because the nut needs delicate work and I have neither the tools or the talent for such work. Both he and I were impressed with the quality of the neck itself, the frets and the truss rod and ultimately how the guitar turned out.

This is a great way of turning a strat, a tele or even a jazzmaster (get the strat neck for the JM) into a baritone!
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie