Start 360°
Broadcast deck for recording and playback
- Offers all the features of the HD models with processing power for Ultra HD
- Fully upgraded to 12G-SDI, including 12G-SDI loop-through output
- Both SDI outputs are 12G-SDI and support ProRes-4444 files for outputting fill and key signals for Ultra HD keying
- HDMI connections switch between all SD, HD and Ultra HD television standards and also switch ProRes and DNx file formats
- Like the other models, it supports H.264 for SD and HD
- For recording in Ultra HD, it switches to H.265
- Two redundant AC power supplies
- 1 SDI video input
- 2 SDI video outputs
- 1 SDI monitor output
- SDI rates: 270 Mbps, 1.5 G, 3 G, 6 G, 12 G
- 1 HDMI 2.0 video input
- 1 HDMI 2.0 video output
- 1 Built-in mono speaker
- Audio output: 1x 6.35 mm headphone jack
- Screen: 2.2" LCD
- Time code connections: 1 XLR input, 1 XLR output
- Reference connections: 1 BNC input, 1 BNC output
- For tri-sync or black burst
- SDI audio inputs/outputs: 16 embedded audio channels
- HDMI audio in/out: 8 embedded audio channels
- Remote control: 1 RS-422 input, 1 RS-422 output
- Computer interface: 1 USB-C 3.0 Gen 2 (up to 10 Gb/s) for recording to external drives, webcam output, software configuration and updates
- Video sampling frequency: 4:2:2 YUV
- Colour accuracy: 10 bit
- Colour spaces: Rec. 601, Rec. 709, Rec. 2020. 33-point 3D LUTs can be applied to the SDI monitor output
- HDR support: Hybrid Log Gamma, ST2084 300, ST2084 500, ST2084 800, ST2084 1000, ST2084 2000, ST2084 4000, ST2084
- Multirate support: Automatic detection of SD, HD, 6G-SDI and 12G-SDI
- Video sampling frequency: 4:2:2 YUV
- Colour accuracy: 10 bit
- Colour spaces: Rec. 601, Rec. 709, Rec. 2020. 33-point 3D LUTs can be applied to SDI monitor output
- HDR support: Hybrid Log-Gamma, ST2084 300, ST2084 500, ST2084 800, ST2084 1000, ST2084 2000, ST2084 4000, ST2084
- Multirate support: Automatic detection of SD, HD and 6G-SDI
- 2 x 2.5" drive bays
- 2 SD card slots
- 1 USB-C 3.0. expansion port for external recording in SD, HD, 2K DCI, Ultra HD and 4K DCI
- Media type: SATA-II or SATA-III 2.5-inch solid-state media UHS-I and UHS-II SD cards
- Storage media format: Formats media in ExFAT (Windows/Mac) or HFS+, (Mac) file systems
- Supported codecs: ProRes HQ QuickTime, ProRes 422 QuickTime, ProRes LT QuickTime, ProRes Proxy QuickTime in all formats up to 2160p/30 Playback in ProRes 4444 QuickTime only up to 1080p/60.
- Automatic distribution of fill-and-key signals via SDI outputs A and B DNxHD 220x, DNxHD 220x MXF, DNxHD 145, DNxHD 145 MXF, DNxHD 45, DNxHD 45 MXF in 720p and 1080p HD formats up to 60 fps DNxHR HQX, DNxHR HQX MXF, DNxHR SQ, DNxHR SQ MXF, DNxHR LB, DNxHR LB MXF in 2K-DCI and 2160p formats up to 30 fps H.264 SDI 4:2:2 10 bit, H.264 High 4:2:0 8 bit, H.264 Medium 4:2:0 8 bit, H.264 Low 4:2:0 8 bit in all progressive formats up to 1080p/60
- Built-in control panel with 16 buttons, seek controller with electronic clutch and 2.2" colour display for transport and unit control
- External control: RS-422 deck control, SDI start/stop, timecode run
- Blackmagic HyperDeck Ethernet Protocol included supports remote file uploads via FTP
- Included software: Blackmagic OS, Blackmagic HyperDeck Setup
- Product software upgrades loaded at boot time or via Blackmagic HyperDeck Setup via USB port
- Compatible operating systems: Mac Catalina 10.15, Mac Big Sur 11.1 or higher, Windows 10, 64 bit
- Power supply: 2 built-in AC power supplies for 100-240 V, 50/60 Hz
- 1 Four-pin XLR socket for external 12 V DC power supply or battery charging (mains cable not included)
- Power consumption: Maximum 100 W
- Dimensions: 482 x 236.4 x 44.2 mm
- Weight: 2.53 kg
Note: No copy-protected HDMI sources can be recorded via the HDMI input. Always inform yourself about copyright before recording or distributing content
Produkt dostępny od
Październik 2021
Numer artykułu
525696
Jednostka sprzedaży
1 szt.
