Benchmark HPA4

1

Headphone Amplifier

  • Preamplifier with balanced and unbalanced inputs and outputs for high demands
  • With THX Achromatic Audio Amplifier (AAA) technology
  • For a realistic and fatigue-free listening experience
  • Precise 256-step fully balanced relay gain control in 0.5 dB steps
  • 100% Analogue
  • Touch screen for an easy access to functions such as balance control, input level offset, input name, dim function, remote, etc.
  • Headphone outputs: 1 x TRS (6.3 mm jack), 1 x XLR (4-pin)
  • THD < -125 dB (0.00006%)
  • Signal-to-noise ratio: > 135 dB (A-weighted)
  • Frequency response: -3 dB @ 0.1 Hz and 500 kHz
  • Output impedance: close to 0 Ohm
  • Max. output power: 6 W at 16 Ohm
  • Crosstalk: < -133 dB @ 1 kHz, -115 dB @ 10 kHz (XLR4)
  • 2x Stereo line input (balanced, XLR)
  • 2x Stereo line input (unbalanced, RCA)
  • 1x Stereo line output (balanced, XLR)
  • 1x Stereo line output (unbalanced, Cinch)
  • 1x Mono sum output (balanced, XLR)
  • 2x Bidirectional 12 V trigger connections
  • Balanced line outputs: distortion factor < -125 dB (0.00006%)
  • Signal-to-noise ratio: 137 dB (A-weighted)
  • Frequency response: -3 dB @ 0.1 Hz and 500 kHz
  • Output impedance: 60 Ohm
  • Maximum input and output voltage: 20 Vrms (+28 dBu)
  • Crosstalk: < -133 dB @ 1 kHz, -116 dB @ 10 kHz
  • Power requirement (nominal): 100 - 240 VAC, 50 - 60 Hz
  • Protection systems: DC and short-circuit detection, overcurrent, overvoltage and thermal protection
  • IR remote for control with separately available Benchmark remote control (art. 501400, not included in the delivery)
  • Dimensions including feet (W x H x D): 22 x 10 x 21 cm
  • Weight: approx. 3.7 kg
  • Colour: Silver
Produkt dostępny od Czerwiec 2021
Numer artykułu 515217
Jednostka sprzedaży 1 szt.
Number of stereo channels 6
Output Level Adjustment Per Channel No
Amount Of Inputs 8
Rack format No
14 990 zł
darmowa wysyłka, zawiera podatek VAT.
Na tel./ email
Na tel./ email

Termin dostawy nie został jeszcze określony W celu uzyskania dalszych informacji prosimy o kontakt.

Informacje dotyczące wysyłki
1

1 Oceny klientów

5 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

obsługa

właściwości

dźwięk

wykończenie

1 Opinia

google translate de
Wystąpił błąd. Proszę spróbować później.
H
Nicht nur transparent, sondern verbessert sogar den Klang erheblich
Hermann55 29.07.2021
Der HPA4 sitzt bei mir zwischen dem DAC (XLR), einem AV-Receiver (RCA) und aktiven LS (XLR). Zuvor war dort ein Benchmark DAC2 als DAC & Pre. Ich kaufte einen besseren, puren DAC und benötigte einen flexiblen Spitzen-Pre.

Der HPA4 bringt das Kunststück fertig, den Klang des schon exzellenten DAC zu verbessern. Nicht nur, dass die unterlegene digitale Lautstärkeregelung deaktiviert ist, ich traute meinen Ohren nicht, als ich +10dB boost einstellte, um die gain stage an die 4V des DAC anzupassen. Der Zuwachs an Dynamik war krass!

Natürlich hat auch der HPA4 eine dezente Klangsignatur. Absolut neutral, klar, punktgenau, mit sehr feinen Höhen. Er hat Kondensatoren (Folie + Elko) in den Eingängen. Sowas hinterlässt immer Spuren im Klang. Die Ausgänge sind DC-gekoppelt.

Bei der Bedienung stört, dass der "HPA4"-Schriftzug einen großen Teil im Display einnimmt. Da hätte auch was nützlicheres Platz.

Im Vergleich zum DAC2 fängt der RCA-input drastisch mehr Störgeräusch ein vom AV-Receiver. Etwas rätselhaft. Ich vermutete einen Defekt und schickte den ersten zurück. Das ist aber offenbar normal. Die XLR sind absolut still.

Insgesamt eine tolle Maschine, die wahrscheinlich nie das schwächste Glied meiner Kette wird. Meine Vorurteile über Preamps hat er jedenfalls pulverisiert.
obsługa
właściwości
dźwięk
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie