Behringer NX6000

61

Lightweight 2-channel class-D power amplifier

  • Power: 2x 3000 Watt at 4 Ohm, 2x 1600 Watt at 8 Ohm
  • Inputs: Jack and XLR
  • Outputs: Speaker-twist
  • Built-in crossover
  • Integrated limiter
  • Mains, signal and limit LEDs
  • Dimensions: 19" / 2 HE
  • Housing depth: 320 mm
  • Weight: 5.9 kg
Produkt dostępny od Październik 2018
Numer artykułu 448012
Jednostka sprzedaży 1 szt.
Power (4 Ohms) per Channel 3000 W
Channels 2
Rack Units 2 U
Amp Class Class D
2 Ohm stable No
DSP/Crossover No
Convection cooling No
Width in mm 483 mm
Depth in mm 320 mm
Height in mm 88 mm
Weight 5,9 kg
Bridged Mode 1
Temperature controlled fan 1
Input XLR 1
Jack Input 6,3 sym. 1
Input 6,3 mm Jack unsym. 1
Parallel Input 1
Link Out No
Output Speaker Twist 1
Pokaż więcej
2 666 zł
darmowa wysyłka, zawiera podatek VAT.
Dostępny za 2-3 tygodnie
Dostępny za 2-3 tygodnie

Produkt będzie za niedługo dostępny i natychmiastowo gotowy do wysyłk.

Informacje dotyczące wysyłki
1

61 Oceny klientów

4.7 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

obsługa

właściwości

dźwięk

wykończenie

30 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
n
Lightweight amp that's great bang for the buck
nigelharps 24.07.2019
Firstly, and above all else, the weight of this amp is phenomenal. Most amps need a forklift to put them into the rack safely, this is so light, and so easy moved, I wish I had ten of them, and I'll probably buy more of them going forward.

I use this as part of a small 250 capacity venue, powering FOH speakers and I cannot fault it.

It can take a serious load before it gets too much, and running a couple of them together with a crossover works like a dream.

Couldn't go wrong with it, and I'd highly recommend.
obsługa
właściwości
dźwięk
wykończenie
4
2
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Antonio5 04.10.2021
( I use : 2 Behringer NX3000 in crossover mode with 4 yamaha midi/high 1000 w columns - together with : 2 Behringer NX6000 in crossover mode with 4 Montarbo 2000 w bass columns )

Great Sound Quality & Power. Cases are light weight , Easy to use and Low noise fans . Hope they last for many years to come . . .
obsługa
właściwości
dźwięk
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
a
Good looking poweramp
arrow276 03.03.2020
The pictures of the NX6000 do not do it justice, this could sit in the front room with my marantz and not look out of place. Early tests were all good (Chronixx - Skanking Sweet)
obsługa
właściwości
dźwięk
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
d
The worst quality
dynagrego 03.05.2023
I bought three NX6000. All of them are not working now because limiter light tuns red even without speakers or input signal on the amplifier.
Stay away from this product.
obsługa
właściwości
dźwięk
wykończenie
1
1
Zgłoś nadużycie

Zgłoś nadużycie