Behringer 962 Sequential Switch

35

Eurorack Module

  • Analogue CV multiplexer / switch
  • 3 Trigger inputs and outputs
  • 3 Buttons for manual channel selection
  • CV Input for switching channels
  • 2 Parallel V trigger outputs
  • Width: 8 HP
Produkt dostępny od Maj 2020
Numer artykułu 486900
Jednostka sprzedaży 1 szt.
Width 8 TE / HP
246 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny za 6-8 tygodnie
Dostępny za 6-8 tygodnie

Produkt będzie za niedługo dostępny i natychmiastowo gotowy do wysyłk.

Informacje dotyczące wysyłki
1

35 Oceny klientów

4.9 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

obsługa

właściwości

wykończenie

18 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
J
Extend the 960 sequencer to 16 or 24 steps
John5372 10.12.2020
This is a v-trig driven 2 or 3 way switch. The 2/3 step selection is determined by patching an output from the 3rd step.
I use a pair of these to extend the 960 sequencers but it has other applications. It switches control voltages so can be used for switching between modulation sources like ADSRs. I have these in a large rig based on the Moog IIIp. I had the original Moog back in the day and these little eurorack clones work the same, are well built, smaller and cheaper. As it is driven by the rising edge of a v-trig you could use it with other systems. It works well with my Doepfer rig too. If you have a 960 sequencer you definitely need one of these.
obsługa
właściwości
wykończenie
3
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
s
Excellent module!
shlomi 29.01.2021
I recommend it for use in any Eurorac case. It is very useful. I use it mainly to change or replace a subject (instead of lowering or raising the volume in the mixer for example).
I recommend it for use in any Eurorac case. It is very useful. I use it mainly to change or replace a subject (instead of lowering or raising the volume in the mixer for example).
The price is very reasonable, it is highly recommended to buy more than one.
obsługa
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
N
Must Have module for sure!
N.F 02.11.2022
the 962 Expands greatly on the capabilities of the 960 sequencer and is a great tool for routing and switching between signals to achieve complex modulation
obsługa
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
J
Perfect pair for 960
Jardmonkey 05.03.2021
962 was made for the 960 sequencer, and it works perfectly. Build quality is like a tank, and the price is unbeatable! There are no cons for this purpose built module that does exactly what it is supposed to do.
obsługa
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie