ART Splitcom Pro

70

Microphone Merger / Splitter

  • Phase reverse switch
  • Galvanic isolation of the channels
  • Ground lift switch
  • Main Mic Input XLR
  • Isolated mic input / merger XLR
  • Mic Main Out XLR
  • Isolated Mic Out / Splitter XLR
Produkt dostępny od Wrzesień 2008
Numer artykułu 217486
Jednostka sprzedaży 1 szt.
Number Of Channels 2
Inputs 2
Outputs Per Channel 1
+48 V Phantom power No
Grd Lift Switch Yes
Pad Switch No
Headphone Outputs No
Design Desktop
209 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Piątek, 26.04.
1

70 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

obsługa

właściwości

dźwięk

wykończenie

35 Opinie

H
Hagal 18.12.2023
Bardzo dobry, niezawodny splitter. Mam takie cztery i użuwam ich od lat na scenie i w studiu. Brzmienie przezroczyste. Jedynie te fioletowe napisy są nieczytelne przy słabym oświetleniu.
dźwięk
obsługa
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
R
ART Splitcom Pro
Richard4902 23.02.2015
I've bought this for a specific reason.

I Run 2 BOSE L1s with B2 subs.. and use a Mackie DL806 desk..
I needed only to have one BOSE system in a venue for an event, but needed more inputs than the BOSE Tonematch had.
I used a lead from 2 - XLR outs (desk) to a Stereo jack in for the BOSE PA.
I got such a strange sound, like a crazy reverb and low volume levels, but had no reverb on the desk. I ended up using just the left channel, wasn't happy with the sound that night.. something was missing.

I looked into why and found that, the lead doesn't 'SUM' the outputs to create a clean balanced signal.

Hence why I've bought the ART Splitcom Pro.
I now should be able to have a stereo signal 'SUMMED' into one lead.

I can guarantee someone else has had this problem.
Hope this review will help you.
dźwięk
obsługa
właściwości
wykończenie
1
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
MF
Handy little tool
Matthew F. 18.02.2014
I bought the splitter so we could add one more microphone to our mixing desk. It worked very well for this purpose with out, as far as I can tell, colouring the sound at all. It also works well for sending a signal to two separate outputs. We've used it send the same signal to both the PA and recording equipment.

Build quality is great. It's been travelling around lose in the bottom of my equipment bag for months now and other than a few knocks and scrapes is still in good condition and working perfectly. It's proven to be a good, cheap solution for an annoying problem.
dźwięk
obsługa
właściwości
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Very flexible unit!
Anonimowy 24.07.2015
I use this box (or several of them, actually) to split the signal from the vocal microphones in our rehearsal stidio. On signal goes to the PA and the other to my Zoom R16 recorder. I have also recorded live gigs this way.
dźwięk
obsługa
właściwości
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie