Allparts CTS 1 Meg Ohm Poti Lin

97

Rotary Potentiometer

  • Resistance: 1 Mega Ohm
  • Knurled shaft
  • Linear
Produkt dostępny od Luty 2006
Numer artykułu 189480
Jednostka sprzedaży 1 szt.
Design Linear Taper
Resistance Value 1000 kOhms
Characteristic Curve Linear
Thread Length 9,0 mm
Tandem Poti No
Push/Push No
Solderless No
shaft type grooved
32 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Poniedziałek, 29.04.
1

97 Oceny klientów

4.7 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

46 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
w
Good potentiometer, solid and versatile
wgen 10.11.2016
I bought some of these 1 Meg ohm potentiometers when I had to buy some different materials that I thought I would need to do some guitar wirings.
I know that these were (are?) used in vintage types of guitars like many Fender Jaguars, Jazzmasters and early 70s Telecasters, so we are talking about a bright, cutting tone.
Well, believe it or not, they do deliver! In fact, they let your pickups, whatever they are, to keep more of their natural resonance, so the sound will obviously be brighter. Just do a quick search online and you'll find more infos about 1 Meg ohm pots. For me they are just great, if you want to make your instrument a little brighter, they won't disappoint you
wykończenie
3
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
D
CTS pots are worth the hype.
DonSchlup 08.11.2020
Got this to upgrade my Squier J Mascis Jazzmaster electronics, and love them. The stock ones were unreliable, and were on their last legs, so I got the proper Allparts CTS ones and haven't looked back. Their taper is great, and made the guitar feel closer to a proper Fender one. Sturdy, reliable, and they work. What more can you ask for, right?
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
D
Better than the stocks
DickPuound 06.07.2021
Bought them to replace the stock ones in my new guitar. It was not an entry level guitar, actually quite far from it, but when I measured both volume pots they were 750 and 860 respectively, quite far from 1Meg.
These ones where both 1015 and the tone changed quite a bit after installing them.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
EB
AllParts reliability...
Edgar Blackdagger 07.08.2022
What I found with any Allparts pots I've bought is that they go wrong like no others.
Within the first 6 months, if the knob is at 10 and you accidentally turn it slightly more, it momentarily kills the sound, so if you're playing with the volume at 6 and you want to to to 10 for a solo, you first get muted for 1/4 of a second, which is something that of course gets worse during the first year and you have to be unreasonably careful.
During the second year, there come the crackles from dust, no matter the guitar or application you're using it, which is something that happens too soon compared with other pot brands.
These may say CTS but the quality control is AllParts...
I prefer Japanese Goldos, they are practically immortal.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie