ABM 1510n Set ABR Nut

12

Nut Set

  • With 6 pieces
  • Milled from full bell brass
  • Strong root and a lot of sustain
  • Bore: 4/40 "
  • Compatible with the Gibson ABR1
  • Material: brass
  • Colour: Nickel
Produkt dostępny od Maj 2012
Numer artykułu 283772
Jednostka sprzedaży 1 szt.
Unmachined No
93 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Szacowana dostawa pomiędzy Czwartek, 9.05. and Piątek, 10.05.
1

12 Oceny klientów

4.8 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

7 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
BI
The brilliance I hoped for
Benjamin I. 27.07.2014
These are for Gibson guitars; to put them on my Epiphone I had to adapt them. You must enlarge the hole at 3mm (pre-drill at 2.5mm, tap at 3mm, if you don't have the tools and the know-how, don't try).

Then file the lttle studs on the sides, or the saddle won't settle down at the right depth in the bridge. That's a little tedious, but brass is easy to work with files.

Once they are in, the difference in brilliance and attack is obvious, I didn't recognize the tone of my SG at first. You must also file a narrow slot where the string touches the saddle, or the string will break after many bends, because it rests on a sharp angle.

Aside from these delicates chores, the saddles are very good in tone. I wish Epiphone would make brass saddles that are compatible with Epiphone bridges, so you could simply drop them in to replace the so-so zinc saddles.
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
J
Great replacement or upgrade
Jonathan4402 06.09.2015
Bought these to replace the saddles on a cheapo no name bridge. You can really tell the difference, adds alot of clarity and sustain due to the high quality materials. Definitely worth the money over cheapo brands
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
KP
ABM 1510N Replacement für ABR-Saitenreiter.
Karsten P. 15.08.2014
Super verarbeitet. Äußerst präzise. ABM hebt sich qualitativ deutlich von den meisten Mitbewerbern ab. Wünschenswert wäre es allerdings, wenn die Kerbung werksseitig getätigt werden würde. Nur die wenigsten haben hierfür die richtigen Feilen, die zudem noch recht teuer sind. Das Polieren der Kerbe ist sicherlich auch nicht jedermanns Sache.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
K
Ersatznut
Klanghölzchen 05.10.2019
Interessante Alternative zu den originalen Gibson Reitern.
Produzieren mehr Höhen als die Originalen und weniger Bässe und MItten.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie