Tovább az oldal tartalmához

Frets

  • 24 pcs 66.67 mm length
  • Hard nickel silver frets
  • Jumbo
  • For extreme pulling of the strings
  • A in mm: 3.25
  • B in mm: 2.99
  • C in mm: 0.60
  • D in mm: 0.53
  • E in mm: 1.47
  • katalógusunkba bekerült: Május 2001
  • Termékszám 148261
  • mennyiségi egység 1 darab
  • Size Extra High Jumbo
  • Amount 24
11 690 ft
Minden ár ÁFÁ-val
Azonnal szállítható
1

41 Ügyfelek értékelései

4.6 / 5

kivitelezés

17 Vélemények

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
GG
Huge Frets!
Graham George 16.04.2015
Thanks once again to Thomann for great service and quality packing. A box of goodies arrived safely in the post - Germany to Spain in just 4 days from day of ordering to delivery at the door!

The 6000 is the Dunlop monster fret rightly described in the description above.
I've got them on another guitar, which I wanted a lot of flexibility to fret level without losing too much of the fret wire height. These are just ideal for a project like that.

Both chunky and high, they are a dream to play. For bending, the height of these frets sets the string high enough above the fretboard for your fingers to push the string from slightly below/under - thus avoiding contact of the string on the fretboard.
Bending becomes effortless with high frets - another reason I like this product!

My previous project was also a flat fingerboard, so these unbent frets are perfect!

If you're installing them as curved frets, they're easily bent to shape but strong enough to give a lot of wear too!

For added safety I drop a tiny drop of epoxy resin, (you could use super glue), at the ends.
kivitelezés
1
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
P
Dunlop 6000
Paul230 16.05.2013
Very good quality fretswire
kivitelezés
1
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
M
Big frets!
Marcus6774 23.07.2014
These frets are so big (and tall) that it's almost like playing on a scalloped fretboard.

Relatively easy to install these with just a plastic/rubber hammer and some super glue. Although, it would have been even more easy if they were not pre-cut, because they have to be bent to the correct radius to fit your fretboard. That can be tricky without professional fret bending tools, but after a few tries I managed to bend them with just my fingers. No significant issues there.

Fret leveling was a breeze since there's so much material to work with.
kivitelezés
0
0
Jelentem!

Jelentem!