Thon Case 8x LED PAR64 Short

Case

  • Made-to-measure transport case for 8 x Stairville LED PAR 64 short
  • Made from 7 mm birch plywood
  • 25 x 25 mm aluminium edges
  • Minimum 1 cm foam padding on bottom, 3 cm convoluted foam in lid
  • 2 x Sprung butterfly catches, medium
  • 4 Hinged handles
  • 8 Compartments, each with dimensions 277 x 277 x 397 mm
  • With stackable ball corners
  • Made in Germany
  • Outer dimensions (W x D x H): approx. 1180 x 603 x 467 mm
  • Weight: approx. 23.0 kg
  • Colour: Phenol brown

Further Information

Case category PAR Light
Number of fixtures 8
Design of compartment Upholstered compartment
Material Birch Plywood, 7 mm
Wheels No
Locks And Catches 2x Butterfly

These are other customers' choices:

Customers who looked at this item have bought these:

Thon Case 8x LED PAR64 Short
42% bought this exact product
Thon Case 8x LED PAR64 Short
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
222 € Add to Basket
Thon Case 8x LED PAR 56 Short
12% bought Thon Case 8x LED PAR 56 Short 213 €
Flyht Pro Case for 4x Par 64 short
5% bought Flyht Pro Case for 4x Par 64 short 159 €
Thon Case 6x LED PAR 56 Short
5% bought Thon Case 6x LED PAR 56 Short 172 €
Thon Case 6x LED PAR64 Short
5% bought Thon Case 6x LED PAR64 Short 199 €
Our most popular Lighting Cases
109 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.5 /5
  • stability
  • handling
  • quality
Total
stability
handling
quality
Thon Case 8x LED PAR64 Short
StephenF, 26.12.2014
I have been looking for a case to transport long Par 56 cans and Par64 LED's for some time. All the cases I have looked at are just a touch to small for the large Par 56 can's. I decided to try this case from Thomann, it looked as if it may just be large enough to take the cans, which it does with ease.
The inside base of the case is lined with a protective foam, so the cans can sit nicely protected and stable. The devisions make sure all 8 of the cans do not fall over in transport and get damaged.
Quality of the build is good, if a little flimsy. I noted that the dividers may need to have small brackets added to stiffen up the top sections. The 7mm plywood has a laminated brown finish which looks as if it will stand up to a little abuse.
Overall Thormann has come up with a good compromise between build quality and finished weight. Using a thicker plywood would have made the case much stiffer but added a lot of weight.
As this is a fairly big case I was surprised that I could lift it (all be it empty) out of it's packing box. When loaded with the lights it is still manageable, and the handles make it easy to move around and load. I decided not to fit wheels, as these would make stacking the case much harder, instead I use a trolly board if I need to move the case over long distances.
All the fittings are nicely cut into the plywood and all the rivets finished off well. I liked the way the quality ball corners will help the case stack in storage.
I have already decided to buy more of these cases to protect and transport my other sound and lighting gear.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
stability
handling
quality
Basic enough but does the job
Gerry5992, 01.01.2019
First thing i would say is buy 4 castors (wheels) for this or you will die lifting it.
I have about 10 of these all at least 3 years old and all still ok.
It?s a cheap case for the money but it?s all down to how you handle it.
All of mine are still in perfect order. I use them for cans and also my arri lights fit in with a g clamp on so that?s a bonus
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
stability
handling
quality
A product that is great, but room for improvement.
14.10.2016
I have two of these cases which i use to store LED cans. In one I can fit 8x Par64 LED cans + short DMX and power cables, in the other i use it to hold 24x Cameo 7x9w Flat LED par cans + 24 wooden floor stands/bases.

A bit too bulky and heavy (once filled) to capacity (or beyond) - wish it had wheels. Case is also liable to twisting and torsion. As such bigger butterfly catches could have been fitted.

The plus side is that they have been touring now for 2+ years with no damage to the case or significant corrosion to metalwork.

The case is very spacey!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
stability
handling
quality
Good quality flight case for parcan
Jinu, 10.06.2015
Its a very good quality flight case for the par cans. Unfortunately its missing the wheels. With wheels its a perfect choice. Planning to buy one more for out other set of parcans.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
222 €
Including VAT; Excluding 20 € shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-45
FAX: +49-9546-9223-443
Online Guides
Racks & Cases
Racks & Cases
If you take good care of your equipment, your pack it up carefully - and this means getting a proper case!
 
 
 
 
 
test results:
Offers include VAT and are valid as long as stocks last. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
(1)
Recently Viewed
Toontrack EZbass

Toontrack EZbass (ESD); virtual bass guitar; extensively produced bass software / plugin with 2 basses, based on samples of an Alembic 5-String bass and a 5-string Fender Jazz Bass; sub bass with two synthesized sine tones add both fullness and...

(6)
Recently Viewed
Millenium MPS-750X E-Drum Mesh Set

Millenium MPS-750X E-Drum Mesh Set, Set containing 1x 10" dual zone mesh snare pad, 3x 10" dual zone mesh tom pads, 1x 8" mesh head kick pad with pedal, 1x 10" hi-hat pad with controller mounted on stand,1x 12" dual...

Recently Viewed
Adam T8V

Adam T8V; Active Nearfield Monitor; 8" Woofer; 1.9" U-ART Accelerated Ribbon Tweeter; 2x Class-D Amp: 70 Watts RMS Woofer, 20 Watts RMS Tweeter; Frequency Range: 33 Hz - 25 kHz; Crossover Frequency: 2.6 kHz; max. SPL: 118 dB (1m /...

(5)
Recently Viewed
Behringer CAT

Analogue Synthesiser VCO 1 with 4 miscible waveforms (sawtooth, triangle, pulse and suboctave), Pulse width modulation and two adjustable modulation sources, VCO 2 with 3 mixable waveforms (sawtooth triangle and suboctave) and two adjustable modulation sources, Low pass filter...

(3)
Recently Viewed
iZotope Music Maker's Bundle

iZotope Music Maker's Bundle (ESD); Plugin-Bundle; contains eight essential tools for audio editing and creative music production; consists of BreakTweaker Exp, Stutter Edit, Trash 2, Iris 2, Elements Suite (Nectar Elements, Neutron Elements, Ozone Elements und RX Elements); supported formats...

Recently Viewed
K&M 80310

K&M 80310 disinfectant stand with bracket; bottle holder dimensions: 102 x 91 mm; base diameter: 275 mm; drip cup can be removed for cleaning; with bracket to fix the disinfectant bottle ; round base; weight: 3,6 kg; colour: pure white;...

Recently Viewed
tc electronic Hall Of Fame 2 Mini Reverb

Effect pedal for electric and acoustic guitar Reverb, TC MASH technology transforms the foot switch into a pressure-sensitive expression controller, New Schimmer-Reverb Algorithm, The Analog-Dry Through maintains the integrity of the dry signal when the reverb is switched on,...

Recently Viewed
Fender SQ Bullet Comp. Mustang HH AW

Fender Squier Bullet Competition Mustang HH Arctic White, mustang electric guitar; body: poplar; neck: 1-pc. maple; fingerboard: indian laurel; neck mount: bolt-on; neck shape: c; inlays: pearloid dots; 22 medium jumbo frets; nut: plastic; nut width: 42 mm (1,65"); scale:...

Recently Viewed
Rode Wireless GO White

Rode Wireless GO White; Digital Wireless Microphone System; ultra-compact and lightweight set of transmitter and receiver; series III 2.4 GHz digital transmission; clip-on transmitter TX with built-in microphone (omni capsule); maximum SPL: 100 dB; Frequency Range: 50 Hz – 20...

(1)
Recently Viewed
Mackie CR3-X

Multimedia Monitors Equipped with a 3" woofer and a 0.75" tweeter, Power: 50 W, Frequency range: 80 - 20,000 Hz (-3 dB), Housing: MDF, Power supply: 100 - 240 V AC, 50/60 Hz, Dimensions (W x H x D):...

Recently Viewed
FabFilter Saturn 2

FabFilter Saturn 2 (ESD); multiband distortion plugin; variable distortion and saturation effect with up to 6 frequency bands, with optional linear phase processing; 28 different distortion styles, from subtle analog saturation to brute digital; adjustable slope for the crossovers, offering...

(1)
Recently Viewed
Harley Benton ST-62BK Hot Rod

Harley Benton ST-62 BK Vintage Series Electric Guitar - Bolt-On Neck construction, Basswood Body, Canadian Maple Neck, "C" Neck Profile, pau ferro fretboard, fretboard radius: 350mm, 22 Frets, Scale: 648 mm, 42 mm Saddle Width, Double Action Trussrod, 2x Roswell...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.