Thon Studio Desktop Rack 4U maple

Desktop Rack 4U

  • Material: made of 19 mm coated panels
  • Maple look
  • Infinitely adjustable 4U rail
  • Installation depth 29.5 cm
  • 4 Felt pads in the front edge of the rack
  • Bevelled edge in front of the rack
  • Incl. screw set
  • Dimensions (W x D x H): 54 x 34/30 x 22 cm
  • Manufactured in Germany

Further Information

usable height in U 4 U
Material MDF 18 mm
Wheels No
63 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.8 /5
  • stability
  • quality
Total
It's a 4U Desktop rack in a maple finish, job done
Walter7302, 18.11.2013
I'm using this to hold a twin CD drive and controller and it is the perfect depth, a lot of desktop racks are very deep and 'industrial' looking but this is ideal for mic processors, EQ etc. The rack itself is wobble free without any hardware in it and rock solid with the equipment in, the leading edge of the rack has a slight rake back which gives a good look. The maple finish is very well applied with no sign of the foil lifting at corners or edges and gives the impression that it should last. The CD drives are being used as sources for specialist programs in a small radio studio and the rack does not look at all out of place. Very fair value for money.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Suited for small home studios
Aspacs, 27.01.2015
The Thon Studio Desktop Rack does as promised. You get 4U of space (leaving me with "headroom" of about 5mm, which might be too few for a heat-inducing-poweramp) within 4 veneered pieces of (ply-?)wood, with a thickness of about 1,6cm each.

The height is well suited for placing a monitor on top, while you're using a laptop. On the other hand - unless you get a second unit, you have scarce room, so be aware of that, when you use it as starting equipment for your home studio.

The veneer is done better than on IKEA-furniture, where you can expect damaged/chipped/unclean edges.

On another note - my rack is housing a Line 6 preamp/modelling-unit and a rack-drawer. Do not forget the dimensions! The rack drawer protrudes the rack by about 15cm.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Practical and stylish
Th_Sch, 30.05.2017
This is exactly what I needed: a compact, stylish rack that doesn't take up too much space on my desk. It comes all pieced together, so you don't even have to assemble the unit. The height is just perfect and allows me to place my monitors on top of them, at ear-height.The quality is excellent, the unit very stable.Good stuff.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
These are some great racks! :P
01.06.2015
No, seriously. I've got my monitors on top of them without any issues, as well as items mounted into them. The look matches my table which is perfect and as it comes in different colors you can use whichever one suits your setup.
Only downside, like any racks I guess, is that it is a m*****f***** to mount things into them, but once the hard work is done you got yourself some nice looking racks for your equipment.
Excellent if all you've currently got for your studio is a flat table.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
111 €
Including VAT; Excluding 20 € shipping
Manufacturing time: 2 weeks
Manufacturing time: 2 weeks

If you need this product urgently please contact us for further information or to see if we have a suitable alternative or a B-Stock available.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-30
FAX: +49-9546-922328
(2)
Recently Viewed
Toontrack EZbass

Toontrack EZbass (ESD); virtual bass guitar; extensively produced bass software / plugin with 2 basses, based on samples of an Alembic 5-String bass and a 5-string Fender Jazz Bass; sub bass with two synthesized sine tones add both fullness and...

Recently Viewed
Adam T8V

Adam T8V; Active Nearfield Monitor; 8" Woofer; 1.9" U-ART Accelerated Ribbon Tweeter; 2x Class-D Amp: 70 Watts RMS Woofer, 20 Watts RMS Tweeter; Frequency Range: 33 Hz - 25 kHz; Crossover Frequency: 2.6 kHz; max. SPL: 118 dB (1m /...

(5)
Recently Viewed
Behringer CAT

Analogue Synthesiser VCO 1 with 4 miscible waveforms (sawtooth, triangle, pulse and suboctave), Pulse width modulation and two adjustable modulation sources, VCO 2 with 3 mixable waveforms (sawtooth triangle and suboctave) and two adjustable modulation sources, Low pass filter...

(4)
Recently Viewed
iZotope Music Maker's Bundle

iZotope Music Maker's Bundle (ESD); Plugin-Bundle; contains eight essential tools for audio editing and creative music production; consists of BreakTweaker Exp, Stutter Edit, Trash 2, Iris 2, Elements Suite (Nectar Elements, Neutron Elements, Ozone Elements und RX Elements); supported formats...

Recently Viewed
K&M 80310

K&M 80310 disinfectant stand with bracket; bottle holder dimensions: 102 x 91 mm; base diameter: 275 mm; drip cup can be removed for cleaning; with bracket to fix the disinfectant bottle ; round base; weight: 3,6 kg; colour: pure white;...

Recently Viewed
Rode Wireless GO White

Rode Wireless GO White; Digital Wireless Microphone System; ultra-compact and lightweight set of transmitter and receiver; series III 2.4 GHz digital transmission; clip-on transmitter TX with built-in microphone (omni capsule); maximum SPL: 100 dB; Frequency Range: 50 Hz – 20...

(2)
Recently Viewed
Presonus Quantum 2626

Thunderbolt 3 Audio Interface 192 Sampling rate, 24-Bit resolution, 8 Microphone amplifiers with up to 60dB gain, 2 Combo input sockets (mic / instrument) and 6x mic / line inputs, 8 x 6.35 mm TRS line outputs, galvanically coupled,...

Recently Viewed
Fender LTD SQ CV 70 P-Bass MN SFG

Fender Limited Squire Classic Vibe 70 P Bass MN SFG, precision electric bass, limited edition; body: poplar; neck: maple; neck mount: bolt on; neck form: c; fingerboard: maple; inlays: black block; 20 narrow tall frets; nut: bone; nut width: 42,8...

Recently Viewed
Rockstand RS 20865 3 E-Guitar Stand

Multi-Guitar Stand For up to 3 electric guitars and / or electric basses, The electric guitar holder can be turned to hold V-style guitars, Can be folded up and folded compactly, Dimensions when set-up (L x W x H):...

(1)
Recently Viewed
Mackie CR3-X

Multimedia Monitors Equipped with a 3" woofer and a 0.75" tweeter, Power: 50 W, Frequency range: 80 - 20,000 Hz (-3 dB), Housing: MDF, Power supply: 100 - 240 V AC, 50/60 Hz, Dimensions (W x H x D):...

(2)
Recently Viewed
Behringer Eurorack Go

Behringer Eurorack Go; Eurorack case; two rows with 140 HP each, build-in busboard with 32 headers for Eurorack modules;, vertical positioning possible via integrated tilt stand; 96 sliding nuts (M3) pre-installed; maximum module depth: 40mm (lower row), 62mm (upper row);...

Recently Viewed
FabFilter Saturn 2

FabFilter Saturn 2 (ESD); multiband distortion plugin; variable distortion and saturation effect with up to 6 frequency bands, with optional linear phase processing; 28 different distortion styles, from subtle analog saturation to brute digital; adjustable slope for the crossovers, offering...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.