Global Truss F34Multi BoxCorner

F34 Corner Box

  • Tube spacing (outer): 29 cm
  • Diameter of main tube: 50 mm
  • Wall thickness: 3 mm
  • Tube diameter, brace: 20 mm
  • Material: AlMgSi F31
  • Weight: 5.6 kg
  • Semi-conical connector set not included (quick connectors sold separately under article no. 212064)

Further Information

Feature Special element
Lenght or diameter 29 cm
Tailings 6
Color Silver
System F34
16 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.9 /5
  • quality
Text ratings for this product are available in another language only so far
de Automatically translated (Show original)
deOriginal review (Show translation)
Unfortunately there was an error. Please try again later.
Total
quality
Very flexible extension - with t cken!
Alexander388, 19.10.2009
Why do you use 4 point trusses? Among other things because of the flexibility with regard to the position of the individual trussing pieces. Since you notice the corner box immediately. Practically, as you can attach a Truss piece on each side - thus ideal for everything with right angles.

As far as the good.

"Normmaße" were often called me - many Trusseckteile have a Schenkellänge of 50cm - but not the Cornerbox, which has here 29cm. This results in trussed structures which are not in the raster 0.5m. Well, I have not hurt so far, unless you want to combine with other corner parts.

There is a remedy here: Truss parts with a length of 21cm. So everything is back up, but not cost-effective.

For beginners or first-time outfitters the corner box is certainly worth considering, if one builds with the truss always right-angled structures.

A but considerable drawback are also annoying are the half cones, which are attached by means of an Allen screw on the box. The dowel pin on the half-cone indicates only the correct orientation, it is not a centering. So it can be that when it is assembled and disassembled here and there times Hakt. Actually, only the diagonal is actually used, so you can also help here:

The half cones, which solve problems and loosen again. So you change the position slightly and the whole has new chances.
If times fits, then fits. Please tighten the screws of the half-cones at regular intervals.

Conclusion:
Basically a brilliant idea to use corner boxes, but they can not be combined with other corner parts right away. Adaptation to other corner pieces is quite cost-intensive. Small defects in the centering of the semiconical connectors, but the problem can be solved.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
fi Automatically translated (Show original)
fiOriginal review (Show translation)
Unfortunately there was an error. Please try again later.
Total
quality
Heavy weight
Kjell S., 29.12.2013
The Corner Box is what it sounds like, Global Truss has done a good afterlife and it also appears and feels that everything is perfect. Note that this corner corner presses and has a good reason, it is and must be decent.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Show variations of this product
Global Truss F34Multi BoxCorner
(16)
Global Truss F34Multi BoxCorner
to the product
239 €

F34 Corner Box Tube spacing (outer): 29 cm, Diameter of main tube: 50 mm, Wall thickness: 3 mm, Tube diameter, brace: 20 mm, Material: AlMgSi F31, Weight: 5.6 kg, Semi-conical connector set not...

  • Feature: Special element
  • Lenght or diameter: 29 cm
  • Tailings: 6
  • Color: Silver
  • System: F34
Global Truss F34C21 90° Corner
(40)
Global Truss F34C21 90° Corner
to the product
144 €

Global Truss F34C21 90° Corner 90° 2-Way Corner F34 4-Point truss, Tube pitch: 29 cm (outside), Main tube diameter: 50 mm, Brace diameter: 20mm, Material: AlMgSi F31, TÜV tested, Weight: 6 kg, With...

  • Feature: Special element
  • Lenght or diameter: 50 cm
  • Tailings: 2
  • Color: Silver
  • System: F34
Global Truss F34T35 T-Piece
(14)
Global Truss F34T35 T-Piece
to the product
222 €

Global Truss F34T35 T-Piece 3-Way T-Piece F34 4-point truss, Tube pitch: 29 cm (outside) with conical connector set (Quicklock), Main tube diameter: 50 mm, Wall thickness: 2 mm, Brace diameter:...

  • Feature: Special element
  • Lenght or diameter: 50 cm
  • Tailings: 3
  • Color: Silver
  • System: F34
Global Truss F34C30 90° Corner
(23)
Global Truss F34C30 90° Corner
to the product
215 €

90° 3-Way Corner F34 4-Point truss, Tube pitch: 29 cm (outside), Main tube diameter: 50 mm, Brace diameter: 20mm, Material: AlMgSi F31, TÜV tested, Weight: 11,5 kg, With conical connector set...

  • Feature: Special element
  • Lenght or diameter: 50 cm
  • Tailings: 3
  • Color: Silver
  • System: F34
Global Truss F34C30-B 90° Corner Black
(1)
Global Truss F34C30-B 90° Corner Black
to the product
279 €

4-Point Truss 90° 3-Way corner F34, Material: AlMgSi F31, Distance between tubes (outside): 29 cm, Main tube diameter: 50 mm, Tube diameter brace: 20 mm, TÜV-certified, Weight: 11.5 kg, Colour:...

  • Feature: Special element
  • Lenght or diameter: 50 cm
  • Tailings: 3
  • Color: Black
  • System: F34
Global Truss F34VC0-180 Various Corner 180°
(1)
Global Truss F34VC0-180 Various Corner 180°
to the product
222 €

"Book Corner" Variable corner, The F34 truss provides strength while minimising transportation volume and weight, Especially suited for event technique, exhibition and shop construction Attention: ...

  • Feature: Special element
  • Tailings: 2
  • Color: Silver
  • System: F34
Global Truss F34T40 T-Piece
(6)
Global Truss F34T40 T-Piece
to the product
259 €

Global Truss F34T40 T-Piece 4-Way T-Piece F34 4-point truss, Tube pitch: 29 cm (outside) with conical connector set (Quicklock), Main tube diameter: 50 mm, Wall thickness: 2 mm, Brace diameter:...

  • Feature: Special element
  • Lenght or diameter: 50 cm
  • Tailings: 4
  • Color: Silver
  • System: F34
Global Truss F34MultiBox-B Corner Black
(1)
Global Truss F34MultiBox-B Corner Black
to the product
279 €

Truss Corner Box Tube spacing: 29 cm (outside), Tube diameter, main tube: 50 mm, Wall thickness: 3 mm, Tube diameter, brace: 20 mm, Material: AlMgSi F31, Weight: 5.6 kg, Colour: Black Note: ...

  • Feature: Special element
  • Lenght or diameter: 29 cm
  • Tailings: 6
  • Color: Black
  • System: F34
Global Truss F34C23 135° Corner
(2)
Global Truss F34C23 135° Corner
to the product
164 €

135° 2-Way Corner F34 4-point truss, Distance between tubes: 29 cm (outside), Diameter of the main tube: 50 mm, Brace diameter: 20 mm, Material: AlMgSi F31, TÜV approved, Weight: 6.0 kg, With...

  • Feature: Special element
  • Lenght or diameter: 50 cm
  • Tailings: 2
  • Color: Silver
  • System: F34
Global Truss F34T35-B T-Piece Black
Global Truss F34T35-B T-Piece Black
to the product
268 €

4-Point Truss 3-Way T-Piece F34, Material: AlMgSi F31, Distance between tubes (outside): 29 cm, Main tube diameter: 50 mm, Wall thickness: 2 mm, Tube diameter brace: 20 mm, TÜV-certified, Weight:...

  • Feature: Special element
  • Lenght or diameter: 50 cm
  • Tailings: 3
  • Color: Black
  • System: F34
Global Truss F34C22 120° Corner
Global Truss F34C22 120° Corner
to the product
152 €

120° 2-Way Corner F34 4-Point truss, Pipe spacing: 29 cm (outside), Main pipe diameter: 50 mm, Brace tube diameter: 20 mm, Material: AlMgSi F31, TÜV approved, Weight: 6.0 kg, With conical connector...

  • Feature: Special element
  • Lenght or diameter: 50 cm
  • Tailings: 2
  • Color: Silver
  • System: F34
239 €
Including VAT; Excluding 20 € shipping

Delivery approx. between Wed, 23. September and Thu, 24. September

Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-45
FAX: +49-9546-9223-443
Offers include VAT and are valid as long as stocks last. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
(4)
Recently Viewed
Behringer 960 Sequential Controller

Behringer 960 Sequential Controller; Eurorack module; analog Step Sequencer with 8 Steps and 3 CV rows; for each Step: CV control knob, mode switch, trigger-button and trigger input/output; selectable voltage range for each row (+8V max.); internal Oscillator as clock...

Recently Viewed
AKAI Professional EWI Solo

AKAI Professional EWI Solo; electronic Wind Instrument with integrated speaker; authentic wind-performance and expression; 200 acoustic and synthestic preset sounds; Mouthpiece with Air-pressure level sensor and bite sensor; 13 touch sensors, Octave Rollers: 6 mobile, 2 fixed touch sensors (8-octave...

(2)
Recently Viewed
Harley Benton Dullahan-FT 24 Roasted IB

Headless Electric Guitar Ergonomically shaped alder body, Bolt-on neck: Roasted Canadian flamed maple, Roasted maple fretboard, Fretboard inlays: Black offset dots, Neck profile: Modern C, Fretboard radius: 350 mm, 24 Stainless steel jumbo frets, GraphTech Tusq XL nut, Nut...

Recently Viewed
Omnitronic TRM-202 MK3

Omnitronic TRM-202 MK3; 2-channel rotary mixer with 3-band frequency isolator for DJs; classic rotary mixer with 2 input channels and integrated 3-band frequency isolator for DJs; gain control, 2-way equalizer (Highs/Lows) and phono/line switching per channel; dedicated boost and kill...

Recently Viewed
Thomann ComboDesk88 - designed by Zaor

Producer Workstation Designed by Zaor, Ideal for home and project studios, Extremely sturdy and ergonomic construction, 19" Racks with a total of 3x 3 U, Includes cover plates for 19" racks for expanding the table surface and rack rail,...

Recently Viewed
Blackmagic Design DaVinci Resolve Activ. Code

Blackmagic Design DaVinci Resolve Studio Dongle; professional software for editing, color correction, audio post production and visual effects; completely in one application; for Mac, Windows and Linux; Software license without USB license dongle; Requires an internet connection when logging in;...

Recently Viewed
Kala U-Bass Nomad 4 NT

Kala U-Bass Nomad 4 NT, acoustic-electric U-Bass, 20 13/16" (528 mm) scale, 29 3/8" (746 mm) overall length, Mahogany top, Mahogany back and sides, Mahogany neck, 16 frets, Rosewood fingerboard, Graph Tech NuBone nut, composite saddle, custom black die cast...

Recently Viewed
Novation Launchkey 25 MK3

USB MIDI keyboard 25 Keys with velocity sensitivity, 16 RGB illuminated velocity-sensitive pads, Scale and Chord modes, Arpeggiator, Capture MIDI function, MIDI mappings, Device lock, Pitch bend and modulation wheel, 2 x 16 Character display, 8 Controls, Buttons for...

Recently Viewed
Hercules Stands KS400B

Hercules Stands KS400B Keyboardstand for 1 Keyboards, Z-Style, heigth: 605 - 930 mm, width 510 - 850 mm, support depth: 450 mm, weight 8 kg, max. load 130 kg, folded size 705 mm x 605 mm x 175 mm

Recently Viewed
Manfrotto 244MICRO Friction Arm

Manfrotto 244MICRO Friction Arm; Variable friction arm with interchangeable 1/4" and 3/8" adapters; Variable friction arm prevents wobble and sway; Solid aluminum construction allows for heavy loads; Ergonomic handle for precise, controlled movements; High compatibility with many available adapters; Techn....

Recently Viewed
Larry Carlton H7 STR

Electric Guitar Semi-hollow design, Maple body, Flamed maple top, Mahogany neck, Set-in neck attachment, Ebony fretboard, Square fretboard inlays, C Neck profile, 22 Medium jumbo frets, Scale: 627 mm (24.7"), Fretboard radius: 305 mm (12"), Nut width: 42 mm...

Recently Viewed
Cosmotronic Cosmix

Cosmotronic Cosmix; Eurorack module; 8-channel stereo mixer; 4 mono channels with volume fader, panaorama control and aux send (pre/post switchable for each channel); 2 stereo channels with volume fader; mute switch for each channel; stereo overdrive circuit with separate Low...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.