Göldo HW50C 3-D Bass Bridge

Bridge for a 4-string electric bass

  • Solid base plate and the single bridges are made from die-cast zinc (like all badass bridges)
  • Saddles are lockable and made from steel
  • Bore (screw) hole spacing: 19 mm
  • Individual string spacing: 19 mm
  • Total string spacing: 56 mm
  • Dimensions (L x W x H): 59.5 x 83 x 12 mm
  • Colour: chrome

Further Information

Colour Chrome
Design Bridge, String Holder, One-Piece
Amount Of Strings 4
71 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.8 / 5.0
  • quality
35 written ratings Read all reviews
cortfield, 16.04.2015
bridge is too high for a normal jazz bass. nuts had to be filed in order to be lowered. access to nut fixing screw is very difficult when string is on.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
de Automatically translated (Show original)
deOriginal review (Show translation)
Unfortunately there was an error. Please try again later.
Solid, but "frickel" part with construction weakness
Thorsten S. 139, 09.01.2016
I wanted to repair an Ibanez replica with a "HiMass" -like angular bridge, which was probably bent by a poor quality material. And Göldo has a very good reputation despite the fair prices, I've already installed dozens of potis, screws etc. without ever having problems. And the bridge is also massive.

The part itself is quite heavy and as far as processing quality is concerned. A lot of small maggots are responsible for the adjustment and if you touch them with the necessary fingertip / feel sensitivity they do their duty without any problems - there are no M10 machine screws!

A complete rethinking requires however the fine adjustment of the intonation. In almost all 4- and 5-way bridges the intonation is adjusted by means of a long adjustment screw, usually combined with a spring. Here Göldo goes a different way. The string rider has to be shifted by hand, a small scale screw slanting under the string secures the whole thing against adjustment. And that is by far not as easy as it sounds. Where there is still some space under the thin G-string to use the included Allen wrench, it becomes increasingly difficult or impossible to reach the blade screw with increasing string thickness. So adjust, then release the string again and raise it with a non-sharp tool, hope the string rider will not slip, tighten, insert the string, agree and hope .... This is in my opinion the only construction fault of a otherwise very balanced bridge- and that Calculated with the setting possibility one needs in practice the most.

And in a few years when dust and protection has pushed under the riders, the chrome is a little dull .... ub then the riders can still be moved as easily as with a new bridge?

I used it, it sounds ok (the old bridge was almost as difficult) and I leave it on it now ..... but I would not buy it to me anymore.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
28 €
Including VAT; Excluding 20 € shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-20
FAX: +49-9546-9223-24
Offers include 24% Greek VAT and are valid as long as stocks last. Shipping costs to Greece are 20 EUR, free shipping on orders above 298 EUR. Please click here for international Shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
Recently Viewed
Shure SE215-CK

Dynamic sound-isolating in-ear earphones Special edition exclusively available from Thomann, Dynamic micro-driver, Shields over 90% of ambient noise, Suitable for in-ear monitoring as well as HiFi listener for e.g. MP3 player, Ear-insertion, Impedance: 20 Ohm, Sensitivity: 107 dB SPL/mW,...

Recently Viewed
Yamaha Stagepas 1k

Yamaha Stagepas 1k, portable active PA system, 1000W (HF:190W+LF:810W) power output, 12" subwoofer for low frequency, 1.5" x10 slim line array speaker for high frequency, digital mixer (3 mono mic/line + 1 stereo line), multi band comp mode for master...

Recently Viewed
Rode Lavalier GO

Rode Lavalier GO; Lavalier Microphone; pairs perfectly with Røde Wireless GO (item 463781); works with most other devices with a 3.5mm TRS microphone input; compatible with most laptops, DSLR cameras, mobile recorders etc.; broadcast grade omnidirectional condensor capsule; Frequency Range:...

Recently Viewed
Electro Harmonix BASS9 Bass Machine

Effects pedal for electric guitar Generates different bass sounds from the instrument signal, No special pickups necessary, With a new algorithm that has been revised for transposing one to two octaves down with superior dynamics and optimised tracking, 9...

Recently Viewed
Sennheiser HD-600 New Version 2019

Headphones Vibrant, Open, Circumaural, Impedance: 300 Ohm, Sound pressure level: 97 dB, Transmission range: 12 - 39,000 Hz, Two-sided cable routing, 3 m Cable with 3.5 mm jack connection, Weight without cable: 253 g, Weight with cable: 309 g,...

Recently Viewed
Marshall Fridge 4.4 Black

Marshall Fridge 4.4 Black; half stack design, Matte black finish on inside and outside; 7 blue LED´s; interior lighting 3 Watt E-14,Transparent removable trays; Thermostat placed at the side adjustable temperature; Increased tray space in door with additional metal holder...

Recently Viewed
XVive U3C Microphone Wireless System

Digital wireless microphone transceiver system For use with condenser microphones, Integrated phantom power: 48 V / 12 V, Works without battery or mains power, Integrated rechargeable lithium rechargeable battery, Range up to 20 m / 70 ft. (without obstacles),...

Recently Viewed
Roland DJ-707M

Roland DJ-707M; DJ-Controller; 4-channel Serato DJ Pro controller with 4 decks; combines a portable live sound audio mixer, loudspeaker management system and performance DJ controller; built-in 24-bit/48 kHz audio interface; 4-band output EQ, multiband compressor and limiter on each Master,...

Recently Viewed
Polyend Poly 2

Polyend Poly 2; MIDI to CV interface; supports all Midi USB controllers with class compliance; USB Type B port for direct connection to computer/DAW; four gate & pitch outputs; first, next & channel mode; twelve configurable CV outputs; scales function;...

Recently Viewed
Marshall Kilburn II Black

Portable Bluetooth Speaker Loudspeaker equipment: 20 W Woofer and 2 x 8 W tweeter, Class D power amplifier, Frequency range: 52 - 20,000 Hz, Bluetooth Standard V 5.0, Input: 3.5 mm Mini jack for MP3 player etc., Volume control....

Recently Viewed
KMA Audio Machines Logan Overdrive

Effect Pedal for Electric Guitar & Bass Open and very touch-responsive, High-headroom-design (up to 25 dB)solos, Perfect for use as a preamplifier with IR Cab-Sim or amp-less, 3-band Active EQ with adjustable middle frequency, Middle footswitch to boost solos,...

Recently Viewed
Sequenz Volca Rack

Synthesizer Rack Offers enough room for up to 4 Korg Volcas, Sturdy aluminium frame, Rubber legs for a secure hold, Side panels are made from wood, Asymmetrical side panels enable 2 different kinds of installation, Dimensions: 411 x 242...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.