Decotruss 3 Point Truss Silver 47cm

Deco Truss

Through a variety of trusses and corners you can create fantastic structures. Decotruss is suitable to create individual design elements, such as shopfitting and trade show booths. Decotruss constructions can be used as design elements and for low weight installations.

  • Length: 47 cm
  • Colour: Silver (aluminium)
  • The decorative trussing
  • Easy installation
  • The Decotruss elements can be screwed together with the connecting plates using three M8 screws
  • Please note the applicable trussing construction guidelines
  • Max. distributed section load: 35 kg
  • Longitudinal tubes: 15 x 1 mm
  • Crossbars: 5 mm
  • Dimensions: 470 x 150 x 130 mm

Further Information

Feature Straight
Lenght or diameter 47 cm
Tailings 2
Colour Silver
System Decotruss
5 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4 / 5.0
  • quality
3 written ratings Read all reviews
Total
quality
Detours short section review
UK Beachboys, 16.05.2015
Thomann asked me to rate this product as I have quite a few lengths of this range of trussing.

I've no idea why the manufacturer produces two different short lengths - 45 and 47cm, but don't do a 50cm length - but for my purposes, this is ideal.

There are a couple of important points to note - the cross bracing extends to almost the end plates to keep the angles correct - which does mean that getting a spanner in is slightly more tricky, and if you are using M10 wing nuts, as I sometimes do, getting them to rotate means they need to be touching the end plate - you cannot put a bolt through and spin them down, the bracing gets in the way.

This range is NOT aluminium. This isn't that clear in the text, but the truss is steel, coated with decent amounts of paint. Some of the welds are a little rough, and in a couple of mine, the actual gap is quite wide, with the weld used as a filler. Keeping in mind the fact that this truss is carefully described as decorative, there are no issues with strength. Being steel, all the lengths, including the 2m length are extremely stiff and do not flex. The weak link, that makes them unsuitable for supporting heavy loads, is the coupling system. The 3 chords are welded to triangular steel; end plates, with a large centre hole, and 3 holes for M10 bolts. If you join two lengths of truss and apply force, these end plates will flex, and if you push this, they bend. I am using them vertically, attached to 600mm2 base plates and supporting light weight LED fixtures. There is not issue with rigidity on the 47cm, 1m and 1.5m lengths. The 2m length fixed vertically does flex the bottom plate very slightly. The shorter sections show no issues at all with a load of 9Kg. Thomann and the manufacturer make it very clear that this truss is not designed to support loads, but my calculations show that my usage is within the capabilities of the truss design, as the manufacturer makes a number of additional components to support more interesting truss shapes. I am happy using the truss vertically, and using 2m top horizontal spans supported by 4 legs produces a strong structure with the ability to support (as mentioned in the manufacturers details) lightweight lighting - using purpose made G clamps to fit the tube. These short sections can easily add useful height to these structures, or as in my most common usage, a nice way to get an LED fixture off the ground.

The actual colour should really be described as grey, not silver, as it's a certainly not the silver aluminium type colour, but is slightly darker. I will certainly buy more of this product.

The manual give no loading figures whatsoever, but looking at the weights of the corners, bends and other coupling pieces, it is easy to see the truss is strong enough to support such a load.

I normally use it with 8 pieces mounted vertically on base plates, with an LED uplighter at the bottom of each one, and a moving head on the top.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Lenght or diameter: 47 cm
Decotruss 3 Point Truss Silver 47cm
(5)
Decotruss 3 Point Truss Silver 47cm
to the product
19,40 €

Deco Truss Through a variety of trusses and corners you can create fantastic structures. Decotruss is suitable to create individual design elements, such as shopfitting and trade show booths....

  • Feature: Straight
  • Lenght or diameter: 47 cm
  • Tailings: 2
  • Colour: Silver
  • System: Decotruss
Decotruss 3 Point Truss Silver 2m
(90)
Decotruss 3 Point Truss Silver 2m

Truss The Decotruss elements can be screwed together with the connecting plates with three M8 screws. Through a variety of cross beams and corners you can create fantastic structures. Decotruss is...

  • Feature: Straight
  • Lenght or diameter: 200 cm
  • Tailings: 2
  • Colour: Silver
  • System: Decotruss
Decotruss 3 Point Truss 1,5m
(71)
Decotruss 3 Point Truss 1,5m

Deco Truss Through a variety of trusses and corners you can create fantastic structures. Decotruss is suitable to create individual design-elements, such as shopfitting and trade show booths....

  • Feature: Straight
  • Lenght or diameter: 150 cm
  • Tailings: 2
  • Colour: Silver
  • System: Decotruss
Decotruss 3 Point Truss Silver 1m
(93)
Decotruss 3 Point Truss Silver 1m

Truss The Decotruss elements can be screwed together with the connecting plates using three M8 screws. Through a variety of cross beams and corners you can create fantastic structures. Decotruss is...

  • Feature: Straight
  • Lenght or diameter: 100 cm
  • Tailings: 2
  • Colour: Silver
  • System: Decotruss
Decotruss 3 Point Truss Silver 45cm
(16)
Decotruss 3 Point Truss Silver 45cm
to the product
14,90 €

Truss The Decotruss elements can be screwed together with the connecting plates using three M8 screws. Through a variety of cross beams and corners you can create fantastic structures. Decotruss is...

  • Feature: Straight
  • Lenght or diameter: 45 cm
  • Tailings: 2
  • Colour: Silver
  • System: Decotruss
Decotruss 3 Point Truss Silver 50cm
(48)
Decotruss 3 Point Truss Silver 50cm
to the product
18,90 €

Truss The Decotruss elements can be screwed together with the connecting plates using three M8 screws. Through a variety of cross beams and corners you can create fantastic structures. Decotruss is...

  • Feature: Straight
  • Lenght or diameter: 50 cm
  • Tailings: 2
  • Colour: Silver
  • System: Decotruss
Decotruss 3 Point Truss Silver 25cm
(26)
Decotruss 3 Point Truss Silver 25cm
to the product
11,70 €

Truss The Decotruss elements can be screwed together with the connecting plates using three M8 screws. Through a variety of cross beams and corners you can create fantastic structures. Decotruss is...

  • Feature: Straight
  • Lenght or diameter: 25 cm
  • Tailings: 2
  • Colour: Silver
  • System: Decotruss
19,40 €
Including VAT; Excluding 20 € shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
gb
Phone: +49-9546-9223-45
FAX: +49-9546-9223-443
Download
 
 
 
 
 
test results:
Offers include 24% Greek VAT and are valid as long as stocks last. Shipping costs to Greece are 20 EUR, free shipping on orders above 298 EUR. Please click here for international Shipping rates. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
(3)
Recently Viewed
Alesis Strike MultiPad

Percussion Pad with Sampler and Looper 9 Velocity-sensitive pads, Adjustable RGB lights, 32 GB internal memory, 4.3" Colour display, Integrated sampler, Loop Recorder creates real-time loops, 2-Channel USB audio interface, WAV import via USB stick, 5 Effect processors, 2...

Recently Viewed
Focusrite Scarlett 8i6 3rd Gen

8-Channel USB2.0 audio interface with USB-C connection 24-Bit / 192 kHz, 2 Scarlett microphone preamps, Phantom power +48 V, Switchable air function, 2 Mic / instrument / line inputs: XLR / 6.3 mm jack combo balanced, 4 Line inputs:...

(1)
Recently Viewed
Antares Auto-Tune EFX+

Antares Auto-Tune EFX+ (ESD); pitch correction plugin; software for automatical or manual correction of pitch and intonation; Retune-Speed control for fine tune the desired effect from subtle natural pitch correction to the Auto-Tune Vocal Effect; humanize function reduces artefacts; Auto-EFX...

(2)
Recently Viewed
Peterson StroboStomp HD

Pedal Tuner Large HD display, Save different tunings in different colours to be able to call them up again easily, True Strobe offers ± ± ± 0.1 Cent accuracy, More than 100 sweetened tunings with USB connection for user-defined...

Recently Viewed
Zoom LiveTrak L-20R

Zoom LiveTrak L-20R; rack-mountable digital mixer, audio interface and recorder; 20 input channels (16 mono plus two stereo channels); 16x XLR / TRS combo-jacks; stereo channels with 2x 6.3 mm jacks and RCA jacks; per channel: gain control knob, 3-band...

Recently Viewed
Arturia KeyLab 88 MkII

Arturia KeyLab 88 MkII; USB/MIDI Control Keyboard with 88 Keys and CV-Connections; weighted Fatar-Keyboard with Hammer Action (Fatar - TP100LR); Velocity sensitive and Aftertouch; 16 illuminated pads with Chord Memory Function; 9 Fader; 9 Rotary Knobs; LCD Display; Transport-Section; Pitch-...

Recently Viewed
Joranalogue Audio Design Contour 1

Joranalogue Contour 1; Eurorack module; analog Slew Limiter and Function Generator; can work as voltage controllable Slew Limiter, AD- or AR-envelope, LFO, Oscillator, frequency divider and more; response curve of rising and falling slopes can each be bent from concave...

Recently Viewed
Line6 Spider V 30 MkII

Electric Guitar Modelling Combo Power: 30 Watts, Speakers configuration: 1 x 8" Custom full-range & tweeter, Classic Speaker Mode for an organic sound and natural playing feel, Amp presets arranged by renowned sound designers (ex. Dan Boul of 65amps),...

Recently Viewed
Revv G 2 Crunch/Overdrive

Effect Pedal for Electric Guitar Crunch/Overdrive, Based on Revv's Green Channel, Expressive and dynamic Crunch Voicing, Clear, Warm and Responsive Tone, The largest Gain & EQ range of any Revv pedal, Controls: Gain, Volume, Bass, Middle Treble, Switch: Drive...

Recently Viewed
iZotope Music Production Suite 2.1 CG4

iZotope Music Production Suite 2.1 Crossgrade 4 (ESD); plug-in bundle; crossgrade from Ozone 8 Advanced, Neutron 3 Advanced, O8N2 or Exponential Audio Surround/3D Reverb Bundles (including Exponential Audio Everything Bundle); extensive collection of software tools for music production, mixing and...

Recently Viewed
Focusrite Scarlett 18i8 3rd Gen

18-Channel USB2.0 audio interface with USB-C connection 24 Bit / 192 kHz, 4 Scarlett microphone preamps, Phantom power +48 V, Switchable air function, 4 Mic / instrument / line inputs: XLR / 6.3 mm jack combo balanced, 4 Line...

Recently Viewed
Intellijel Designs Palette 62 4U Stealth

Eurorack Case 2x Connections for audio in/out modules (6.3 mm TRS), MIDI In (USB A and 3.5 mm jack), Two integrated active 1-on-4 multiplexers, 12 Slots for modules, 2 Module slots with +5V supply, Internal connectors for Intellijel audio...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.