Sivun sisältöön

Machine Head Set for Electric and Western Guitar

  • Set configuration: 3 Left / 3 Right
  • Precise and wear-free
  • Velvet-Tex and LX6-Lube for high precision and tuning comfort
  • Improved manufacturing processes for very high-quality surface finish
  • For headstocks up to 15.4 mm thickness
  • Construction: Closed
  • Buttons: M6 Metal large
  • Ratio: 1:18
  • Shaft length: 19.5 mm
  • Bore: 9.8 mm
  • Mounting: Screw & Locknut
  • Screw ear: 135°
  • Schaller article 10020223.02.52
  • Surface: Chrome
  • Including: Fixing screws, banjo bolts and washers
  • Made in Germany
Myynnissä vuodesta Tammikuu 2017
Tuotenumero 405883
Myyntierä 1 kappaletta
Colour Chrome
Locking Yes
Design Modern
129 €
Kaikki hinnat sis. ALV:n
Varastossa
Varastossa

Tuotetta on varastossa ja se voidaan lähettää heti.

Tietoa lähetyksestä
1

73 Asiakkaiden arviot

4.8 / 5

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

Huomio: jotta vältymme kuulopuheisiin, epätäydelliseen tietoon tai mainontaan perustuvia arvosteluja, niitä saa tehdä vain asiakas, joka on tuotteen meiltä ostanut.

Sisäänkirjautumisen jälkeen löydät kaikki arvosteltavat tuotteet kohdasta “Arvostele tuotteita” asiakastililtäsi.

Työnjälki

58 Arvostelut

A
Laadukas virityskoneisto!
Tuntematon 07.02.2017
Korvasin näillä Gretchin alkuperäiset virittimet. Vire pitää paremmin Bigsby vibratallan kanssa ja kielten vaihto helpottui huomattavasti. Virityskoneiston vaihtoon meni noin. 10 min. Virittimien vaihto ei tehnyt kitarasta "kaulapainoista". Suosittelen.
Työnjälki
1
0
Raportoi ongelmasta

Raportoi ongelmasta

P
a must-buy
PalmMute 17.12.2018
I got these for my 2018 PRS SE Standard 24, they're a lifesaver. I was so fed up with my guitar going out of tune every time that I do bends. Using the tremolo wasn't even an option unless I wanted to invent a new tuning. These were easy to install and they do their job flawlessly, they hold a pitch perfect tuning even through songs with lots of big bends or lots of tremolo. Restringing is much faster and completely effortless with these. The only downside is that they are a lot shorter than the standard tuners, so some people might not like how they look, though they're long enough to not cause any problems. I personally don't mind them being shorter, I actually think they look really nice. In conclusion, I think that these are a must-buy if your guitar has trouble staying in tune, or if you just want a more convenient set of tuners.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

K
Pomminvarmat lukkovorittimet
Kinnupe 06.04.2025
Meni heittämällä PRS SE Customiin
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
r
I didn't enjoy fitting them, but the results made it worthwhile
røde2nowhere 16.07.2020
First, I bought these to fit on a PRS SE Tremonti Custom (2017). After reading many reports of people successfully fitting them, without issues. However, in my experience, it wasn't so straightforward. First, it required a lot of force to get the washer rings into place. And it took a lot of force to press the tuning machines in flush with the back of the headstock. In fact, I damaged the locking mechanism on one of the tuners from pushing too hard against it. Perhaps I should have removed the locking screws first. That one locking mechanism is a bit difficult to turn now, but it does work.

The new tuners weigh in at 42g heavier than the PRS SE stock tuners they replaced. And I don't notice any neck dive or any other issues.

What I do notice is that it is very easy to restring the guitar. And once the strings were stretched and tuned, the tuning is now very stable. I think the guitar was good before, but this is a nice upgrade. I don't regret getting them for this guitar, even though it was a harder job than expected.
Työnjälki
1
0
Raportoi ongelmasta

Raportoi ongelmasta