Palmer WT PB 40 Multi Power Supply

52

Multi Power Supply for Effect Pedals

  • Powerbar power supply with 8 outputs for Palmer Pedalbay 40
  • Can be completely and unobtrusively integrated into the pedal board by simply replacing the first crossbar
  • Output 1-6: 9V DC @ max. 300 mA (individually isolated)
  • Output 7-8: 9/12 / 18V DC @ max. 500 mA (individually isolated)
  • Max. Total power: 2000 mA
  • Power supply with a 12 V DC power adapter (included in delivery)
  • Dimensions (W x D x H): 450 x 50 x 24 mm
  • Weight: 650 g
  • Incldues cable from 5.5 x 2.1 mm coaxial connector to 5.5 x 2.1 mm coaxial connector: 5 pieces with a length of 16 cm and 9 pieces with a length of 60 cm
Myynnissä vuodesta Joulukuu 2019
Tuotenumero 480343
Myyntierä 1 kappaletta
DC/AC current DC
Output current in mA 2000 mA
9 V Yes
12 V Yes
18 V Yes
Multi-output power supply Yes
129 €
Sis. ALV. Ei sisällä 12 € rahtikulua
Varastossa
Varastossa

Tuotetta on varastossa ja se voidaan lähettää heti.

Tietoa lähetyksestä
Arvioitu lähetyspäivä Tiistai, 30.04. mennessä
1

52 Asiakkaiden arviot

4.7 / 5

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

Huomio: jotta vältymme kuulopuheisiin, epätäydelliseen tietoon tai mainontaan perustuvia arvosteluja, niitä saa tehdä vain asiakas, joka on tuotteen meiltä ostanut.

Sisäänkirjautumisen jälkeen löydät kaikki arvosteltavat tuotteet kohdasta “Arvostele tuotteita” asiakastililtäsi.

Työnjälki

29 Arvostelut

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
P
Description not true
Philippe19670 13.12.2021
This is not correct and not honest as the pedal board length is 45 cm and the WT PB 40 is 45,5 cm so I had to adjust by drilling new hole as the pedal board frame was deformed, (longer at the top and shorter at the bottom), so the screw hole were not in place anymore.

NO it cannot be completely and unobtrusively integrated into the pedal board by simply replacing the first crossbar as they say.
Työnjälki
3
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
DM
Better than described
Dave McK 14.11.2020
This is a nice power supply that sits beautifully in my pedal rack and delivers plenty of power. I had a custom pedal that required a little more than the rated amperage and it works without a problem. The original power supply for the custom pedal was a constant nuisance, so this has worked better than expected for me.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
B
Light and strong
Benan 21.04.2021
I bought this one with the Harley Benton SpaceShip 40 bundle to power a Boss RC500 looper, a tc-e quintessence and a ehx oceans 11.

The fit in the pedalboard is REALLY tight. I had to unscrew not only the bar I had to remove but also the next one to allow me to force it a bit into place (no bending the pedalboard). Screwed right back ok.
Power cables of different length, I like it.

Powers correctly my pedals, no umm, invisible power solution. Thing that they could do better is the installation instructions. Like for the protective plate. It's a bit lacking and therefore confusing. (Its just screws so you can't really damage it but would have been faster with proper instructions)
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
NB
Excellent Power Supply for HB Pedalboard
Nicu Baciu 15.05.2021
The product is excellent in design as it fits the pedalboard perfectly and the cables look nice and organized, It has sufficient outputs for almost any pedal configuration and it offers 2 outputs with 3 voltage modes (9V, 12V or 18V) making this a great and versatile option.
Overall I am very satisfied with this power supply and would recommend it to any musician who is into analog pedals and live performance.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta