Sivun sisältöön

Snare Drum

  • Size: 13" x 3.5"
  • "Black Beast" Snare Drum
  • 1.0 mm Steel drum shell
  • 1.6 mm Black steel hoops
  • 10 Tuning screws
  • Metal snare drum for all applications, ideal second and side snare drum
  • Colour: Black
  • Myynnissä vuodesta Huhtikuu 2010
  • Tuotenumero 242348
  • Myyntierä 1 kappaletta
  • Depth in inch 3,5"
  • Die Cast Hoop No
  • Hammered Shell No
  • Shell Colour Black
92 €
Kaikki hinnat sis. ALV:n
Varastossa
1

142 Asiakkaiden arviot

4.4 / 5

Ääni

Työnjälki

82 Arvostelut

N
Hyvä hintalaatusuhde
Nka67 13.04.2019
Käytän tätä verkkokalvon ja triggerin kanssa sähkörumpujen kanssa. Siihen varsinkin todella hyvä virveli. Akustisesta hakkauksesta ei kokemusta muutamaa lyöntiä enempää, joten siitä en voi antaa järkevästi arvosanaa. Riittävän jykevä näihin hommiin. Metritavarainen kanttinauha thomannin valikoimasta sopi paikalleen myös hyvin.
Ääni
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

P
Ponne 15.06.2020
Budjettiluokan virveliksi hyvä, ei mitään selkeää valittamista. Varmaan joku kiinalainenhan tämä on.
Ääni
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

P
Beast of a snare
PetriN 02.07.2020
Low cost but high quality and playabiity. Performs above my all expectations. If you can play, this one delivers (after changing the stock heads) sounds you would expect from a shallow 13" snare.
Ääni
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
D
Nice but needs work.
Drumbot 08.05.2020
The drum is ok but the fitted reso head was so warped and crinkly that the drum was unusable and couldn't be tuned properly. The snare mechanism was loose, as was the odd nut inside the drum. NOT Thomann's fault, this is how it came from the factory. If you put new heads top and bottom and are ok with the loose feel of the snare adjusting mechanism then this drum should be fine. It's a nice size for converting to an E-drum with a mesh head and trigger. That will be much nicer than using smaller electronic mesh or rubber pads. Take off the snare wires, take off the bottom reso head, cut the mylar from the reso, refit it so the drum has a head-rim inside and then the drum will look normal and not weird with the bottom hoop missing. Voila ! AND .. If the snare adjusting mechanism rattles, remove it as it's simply bolted-on.
Ääni
Työnjälki
3
1
Raportoi ongelmasta

Raportoi ongelmasta