Sivun sisältöön

Digital Class D Amplifier

  • Power: 4x 600 W/4 Ohm, 4x 360 W/8 Ohm (RMS)
  • Bridge mode: 2x 1200 W/8 Ohm (RMS)
  • Inputs: 4x XLR (bridge and stereo mode selectable)
  • Protective devices: Short-circuit, overheat, mute on power-up and power-down, DC voltage protection and RF protection
  • LED indicator (signal, limit, protection)
  • 19'' Steel housing
  • Dimensions (W x H x D): 483 x 44 x 390 mm
  • Weight: 6.4 kg
  • Colour: Black
  • Myynnissä vuodesta Toukokuu 2023
  • Tuotenumero 567133
  • Myyntierä 1 kappaletta
  • Power (4 Ohms) per Channel 600 W
  • Channels 4
  • Rack Units 1 U
  • Amp Class Class D
  • 2 Ohm stable No
  • DSP/Crossover No
  • Convection cooling No
  • Width 483 mm
  • Depth in mm 390 mm
  • Height 44 mm
  • Weight 6,4 kg
  • Bridged Mode Yes
  • Temperature controlled fan Yes
  • Input XLR Yes
  • Parallel Input Yes
  • Link Out XLR
  • Output Speaker Twist Yes
484 €
Kaikki hinnat sis. ALV:n
Varastossa
1

2 Asiakkaiden arviot

3 / 5

Käyttö

Ominaisuudet

Ääni

Työnjälki

1 Arvostelu

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
BS
Good potential, let down by design flaw
Barry Sausagechops 14.07.2025
This amp is a good price, light weight, small 1u form factor. I bought it to power a pair of mid tops with separate mid drivers and compression drivers, so needed four channels in one box

Unfortunately there's a problem - unacceptably high levels of crosstalk between channels. If I connect a source to input 1 and a driver to output 2, I hear the signal from in 1 on out 2 (and 3 and 4)

I can't send LF content to my mid drivers and have those low frequencies also going to the comp drivers. They'll be damaged. So the crosstalk prevents the amp working for me.

For the record : I bought the same amp twice from two different suppliers. Both behaved the same. So it looks like a design flaw, not a one-off fault.
Käyttö
Ominaisuudet
Ääni
Työnjälki
9
2
Raportoi ongelmasta

Raportoi ongelmasta