Mojotone CTS 500K Std. Split P/P VT Pot

Start 360°

Vis oversættelse

Potentiometer for Guitar and Bass

Integrated push/pull switch
Resistance curve: Logarithmic
Manufactured in accordance with the high quality requirements as set out by CTS
The "Vintage Taper" resistance curve of these potentiometers is between that of a standard logarithmic and that of a linear pot, enabling a more natural control response
Resistance: 500 kOhm
Finely grooved split shaft (24 splines for US guitars and pot buttons)
Shaft diameter: 6 mm
Thread length: 9.5 mm
Thread diameter: 9.5 mm
Housing diameter: 23.8 mm
Includes a washer, a tooth lock washer, and a nut

Fås siden November 2020

Artikelnummer 494193

salgsenhed 1 stk

Design Split Shaft

Resistance Value 500 kOhms

Characteristic Curve Vintage Taper

Thread Length 9,5 mm

Tandem Poti No

Push/Push Push/Pull

Solderless No

shaft type grooved

105 kr

Inkl. moms. Obs! Yderligere fragtomkostninger 60 kr

Forventet levering mellem torsdag, 2.05. og fredag, 3.05.

Salgsrang

i Potentiometre

Kunder som så på dette produkt købte dette

Allparts CTS 500K Audio Taper Pot

75 kr

købt

Mojotone CTS 500K Std. Split VT Pot

82 kr

købt

Allparts Audio Taper 500k Push/Pull Pot

82 kr

købt

TAD CTS 500K Std. Spl. P/P VAT Pot

90 kr

37 Kundebedømmelser

5 31 Kunder 4 5 Kunder 3 1 Kunde 2 0 Kunder 1 0 Kunder

4.8 / 5

forarbejdning

Retningslinjer for anmeldelser

29 Anmeldelser

Good pots

JensWel 19.01.2023

Closing in on being the best pots for guitar, nice action, well made - housing for switch-part is plastic, but good quality. Recommended

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Excellent as a tone pot, tight fit!

Newbie Guitar Player 09.06.2022

I bought this as part of a pickup swap / rewiring job on my Squier Mustang HH. I installed it as a tone pot and wired the push-pull switch for splitting the bridge humbucker (neck position is a P90). The PCB makes it really easy to wire the P/P. There was also some space between the PCB and the pot itself to tuck in my capacitor and retain the original profile. Do beware that it is a full-sized pot and quite bulky, more so because of the P/P. Be careful and measure your guitar cavity before buying. The Mustang control cavity was a realy tight fit and I had to modify the part a bit by bending the two prongs at the top. I also routed the cables around the pot as there was no space behind/underneath it. The control plate on the Mustang is relatively thin sheet metal and the pot sticks up a bit above the surface, but that doesn't really bother me. Luckily I had no issues with the thread diameter and it dropped right into the control plate opening - no wobble, no need to enlarge the opening. For the knob I used a metal screwable one that has a smooth inside surface and is made for 6mm shaft. If you want to get a knurled knob or re-use your old knob, check your measurements and make sure it has the correct number of splines for the US standard.

Overall I am really satisfied with my purchase, even though I had some minor issues with the fitment. The pot functions well and I am happy with the tone responce I get from the vintage taper in conjunction with a 47nF capacitor. It rotates smoothly and doesn't scratch. Push-pull works as expected. As with any guitar mod, my advice is to measure carefully and be prepared to adjust some things if necessary.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Nice pot

StephanPK 27.01.2022

Big, easy to solder, but could not fit if you have small guitar cavity, so check it before you buy it

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

High quality

Burak Oncel 16.09.2022

This cts pots are in good quality, I like them. But they are very big. You need to know is your guitar cavity big enough for cts pots if you want to buy this product.

Anmeld bedømmelse

Læs alle anmeldelser

Mojotone CTS 500K Std. Split P/P VT Pot

Potentiometer for Guitar and Bass

Kunder som så på dette produkt købte dette

37 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

29 Anmeldelser

Smart Navigator

Artikel historik

Handl og betal sikkert

Dine fordele

Service

Serveret med kærlighed!

Mojotone CTS 500K Std. Split P/P VT Pot

Potentiometer for Guitar and Bass

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

37 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

29 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator