Jaspers MIK 964 Black

15

Adjustable Microphone Arm

  • With holder
  • For D-, V-, M- and S-stands
  • Black model
  • Length: 840 mm
  • With 3/8" connection thread, locking washer and handle
  • Secure clamping
  • A plastic sleeve protects tube from scratches
  • With holder to insert the arm into a vertical tube of the stand
Produkt dostępny od Grudzień 2005
Numer artykułu 187594
Jednostka sprzedaży 1 szt.
Type Of Keyboard Stand Microphone Boom
Colour Black
213 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Poniedziałek, 29.04.
1

15 Oceny klientów

4.5 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

stabilność

wykończenie

9 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
M
A little assembly advice
Matlow 07.02.2023
Great product, just little to no instructions. Therefore for those struggling a little - I used a sharp butchers knife to prise the cap off the vertical bar (you need something sharp to get between the cap and the bar), then used a mallet to get the boom arm stopper wedged in properly. Then tighten the nut on the stopper with a spanner, place the cap over the thread/nut, slide the boom arm out of the holder and screw the holder to the stopper as tight as it’ll go, then it’ll rotate smoothly with a bit of torque force from the reattached boom arm. Job done.
stabilność
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
MG
Works as Advertised but a bit short
M Gho 30.11.2020
I am using it with my Jaspers 2D-145B which is designed for 88 keys. At this width, the microphone arm is positioned around 1.5 Octave above middle C on my RD 700. If you place it on the smaller Jaspers stand, it should be positioned exactly in the middle
stabilność
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie