La conținutul paginii

19" Power Strip / Power Distributor

  • Eight sockets on the back
  • Two Power Twist TR1 (1 x In, 1 x Out) on the front
  • 19" Rackmount
  • Rotatable 19" angle
  • Installation depth: 45 mm
  • Cable length: 2 m
  • Format: 19" / 1 U
  • Colour: Black
  • disponibil din Decembrie 2024
  • numărul articolului 587117
  • unitate de vânzare 1 bucată(ăţi)
  • Colour Black
  • Cabel type H07RN-F
  • Wire Diameter 1,5 mm²
  • Lenght [m] 2 m
  • Input Power Twist TR1 male
  • Power socket outputs 0
  • Euro plug outputs 8
  • USB Outputs 0
  • PowerTwist Outputs 0
  • PowerTwist TR1 Output 1
  • IEC Outputs 0
  • UK Plug outputs 0
  • Switch No
  • Voltage protection No
  • Rack unit Yes
199 lei
Toate prețurile includ TVA
Disponibil in 3-4 Saptamani
1

3 Evaluările clienților

4.7 / 5

Măiestrie

3 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
D
Simple, future-proof
DylanK 02.04.2025
A basic but functional power distributor.

Positive:
- No attached power cable - setup is easier and cleaner.
- Compatible with PowerCon TRU1 in and through (not Neutrik hardware), which seems likely to be the industry standard for the foreseeable future.
- Angled outlets make it easy to fit straight and right-angle plugs in tight racks.
- Possibility to reverse the rack ears.

No major issues, but some missing nice-to-haves:
- LED to indicate presence of power.
- Power switch - not essential since TRU1 can be disconnected under load (i.e. it's safe to just pull the plug even without a switch) but it would sometimes be nice to power off this rack without powering off whatever is connected to the power through connector.
- The power in+through connection block is permanently attached; it's not possible to re-attach it the other way up. If you want the power connectors on the left-hand side of the rack, they will be upside down.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate de
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
D
Endlich wieder ein Rack-Verteiler mit TR1 Ausgang
DKLive 27.01.2025
Ich habe schon länger nach einer Rack-Stromverteilung mit PowerCon TR1 Eingang und Durchschliff gesucht. Und endlich gibt es wieder eine Lösung dafür. Beim Ursprünglichen Bau meines Systemracks musste ich auf eine Adam Hall Stromverteilung ohne TR1 Ausgang ausweichen. Diese kann ich nun guten Gewissens wieder ausbauen.

Die Verarbeitung ist soliden und die Passform erwartungsgemäß passend. Also werde ich da sicherlich noch mehr von kaufen!
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate de
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
G
Super gut und günstig
GertS 18.02.2025
Die baue ich jetzt überall ein.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz