La conținutul paginii

Tube 12AT7 / ECC81

  • Our favorite reverb in Fender amps and a particularly powerful phase driver
  • disponibil din Octombrie 2005
  • numărul articolului 186382
  • unitate de vânzare 1 bucată(ăţi)
  • Preamp Tube Yes
  • Power Amplifier No
  • Matched No
  • Number Of Tubes 1
150 lei
Toate prețurile includ TVA
Disponibil în timp scurt (de obicei 2-5 zile)
Disponibil în timp scurt (de obicei 2-5 zile)

Acest produs a fost comandat și așteptăm să sosească în următoarele câteva zile

Informații despre livrare
1

209 Evaluările clienților

4.7 / 5

Pentru a evalua produse trebuie să fiţi logat.

Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.

După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.

Măiestrie

73 Recenzii

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
Z
Very good PI-tube
Zigguitarius 03.05.2021
I tried this tube in my Behringer V999 first, as a replacement for the rather wild Bugera-tube it came vith. It gave a minor/slight reduced drive and added some clarity to the sound. Not even close the 60 % reduction I might expected. (By the way, this was not the place I bought it for.)

It was purchased to be placed in V1 or V4/PI-pos in my VHT special 44 (or a V1 or V3 (PI) slot in my Hotrod DL), and I tried it first in my VHT V1 pos. Same result; just a slight reduction in gain/breakup. No big deal.

When this was placed in the V4/PI-slot it really showed it's worth: the quality of the sound improved on almost every aspect! Depth, clarity and general sound experience went to a new level (...of confidence and power..! Hi-hi)

I've ordered one more for my Hotrod DL, this is a killer in PI-pos!
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
y
Used as Reverb Driver on Fender Prosonic
ylmzmert 29.04.2021
Worked like a charm for my fender prosonic combo amps reverb driver stage. Has good signal to noise ratio, solved my reverb noise issues
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
G
Excellent medium gain tube
GPGP 01.02.2020
This is an excellent medium gain (60) tube that I'm currently using in both V1 and V3 in my Hot Rod Deluxe. For my use, it has the perfect amount of gain to tame the OD channel a bit, reduced that fizz but still be able to provide the juice when cranked. Highly recommended.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz

google translate gb
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
S
Does what it says
Steven8503 22.02.2015
Well there's a huge choice of ECC81's out there but they all have different characteristics.
My vintage 68 Bandmaster needs a AT7 in the pre-amp stage and so I treated her to one of these.
Not the cheapest of the crop but I am very happy with the results.
It's quiet and appears well engineered.
Not a lot else to say but I have used TAD tubes quite a lot now and have no complaints. They are as described in the blurb.
Măiestrie
0
0
semnaleaza un abuz

semnaleaza un abuz