Göldo WS045 Fretboard Guard

Start 360°

Arată traducerea

Fretboard Guard

Extremely thin stainless steel plate for making small modifications to individual frets (sanding, polishing, rounding). The plate fits the fret wire exactly and protects the area around it.

Slot dimensions: 2.8 x 68 mm

Garantarea rambursării banilor în 30 de zile

disponibil din August 2007
numărul articolului 117877
unitate de vânzare 1 bucată(ăţi)

12,90 lei

Toate prețurile includ TVA

Nivel de vânzări

în Diverse Piese de Schimb

Asta au cumpărat clienții care au văzut acest produs

Dunlop Micro Fine Guitar Polish 5410

46 lei

cumpărat

Rockbag Fingerboard Saver 2 medium

19,90 lei

cumpărat

Rockbag Fingerboard Saver Set

51 lei

cumpărat

Rockbag Fingerboard Saver 3 jumbo

19,90 lei

2627 Evaluările clienților

5 1715 Clienți 4 625 Clienți 3 230 Clienți 2 34 Clienți 1 23 Clienți

4.5 / 5

Măiestrie

Recenzii ghiduri

1048 Recenzii

Must have when working with frets

Cezar 21.11.2022

This product protects the fretboard when doing work to the frets, like polishing, leveling, etc. It is a must have tool for anyone who takes take of their instruments.

semnaleaza un abuz

Consideraţi această evaluare inexacă sau inacceptabilă din anumite motive? Vă rugăm indicaţi motivul părerii dvs în următorul câmp – dacă e posibil – adresa de e-mail pentru întrebări suplimentare.

Fair for the price

Leca0007 03.03.2024

note that it gets too wide for the narrower frets

semnaleaza un abuz

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

Göldo WS045 Fretboard Guard

WD555 30.04.2017

The guard arrived along with a few other item and unfortunately it had been damaged because it's just packaged in a little plastic bag and obviously one of the heavier items and caused a crease across the guard, I was able to straighten it but it's not perfect.
The description for this item doesn't mention the dimensions so for your information it is a thin piece of metal approximately 0.2 mm thick.
Approximately 80mm x 22mm.
The slot measures approximately 3 mm x 69mm.
The slot is not terribly consistent and is a little wider in the middle but this may have been caused by the guard bring damaged in transit.
The guard appears to have been punched out from a sheet rather than being laser cut so the outside edges and the slot are not very well finished with rough sports all the way around, you would need to be careful using it in case it damages a lacquered fingerboard so best to put the smooth side down so the rough side is up but then you need to mind your fingers !
Tried on a selection of guitars, fenders and Gibsons and the slot at 3mm is really too wide as there is space on each side of the fret so the fingerboard isn't protected which pretty much defeats the purpose of using a guard.
I had considered the Rockbag fingerboard guard models and I think they would be better as you can choose the width of the slots from 1.8mm, 2.65mm and 3.15mm, also they come in pairs and are made to be held in place with elastic bands, I think having tried the Göldo version the Rockbag guard looks like a much better product.
The Göldo was a disappointing purchase.

semnaleaza un abuz

Arată traducerea

Arată originalul

Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.

This doesn't quite do the job

Robert Peterson 10.09.2021

This fretboard guard is fine for polishing the 1st fret through to the 15th fret, but the sides are too wide to fit into the 16th, 17th or any higher frets...even on the longer 25.5 inch scale guitars. This thing won't fit past the 15th fret for sure on shorter scale guitars such as Les Pauls and Juniors. Another problem is that the central slot gap isn't big enough for jumbo frets and the guard "rides on top" of the frets instead of going flush against the fretboard.
And finally, since there's no "grip" on the guard, it tends to move around as you're polishing...so you'll need to use one or two fingers just to keep the guard in place, which makes the act of polishing cumbersome and tedious.
Unless you're REALLY worried about roughing up your fretboard finish with a 100 - 400 grade polishing cloth/eraser, then skip this.

semnaleaza un abuz

Citește toate recenziile

Göldo WS045 Fretboard Guard

Fretboard Guard

Asta au cumpărat clienții care au văzut acest produs

2627 Evaluările clienților

Pentru a evalua produse trebuie să fiţi logat.

1048 Recenzii

smart navigator

Servit cu dragoste!

Göldo WS045 Fretboard Guard

Fretboard Guard

Asta au cumpărat clienții care au văzut acest produs

Accesorii și articole compatibile

2627 Evaluările clienților

Pentru a evalua produse trebuie să fiţi logat.

1048 Recenzii

Compară opțiunile

smart navigator