Cu ajutorul cookie-urilor noastre am dori să vă oferim cea mai bună experiență de cumpărături posibilă cu tot ceea ce este însoțit de ele. Aceasta include, de exemplu, oferte adecvate, reclame personalizate și preferințe de memorare. Dacă acest lucru este în regulă, pur și simplu sunteți de acord cu utilizarea cookie-urilor pentru preferințe, statistici și marketing făcând clic pe „Bine!” (arata tot). Vă puteți retrage oricând consimțământul prin intermediul setărilor cookie (aici)
Reţineţi: Pentru a preveni evaluările bazate pe zvonuri sau reclame ascunse permitem doar evaluări de lşa clienţii noştri reali, şi care au cumpărat echipamente de la noi.
După logare veţi găsi de asemenea toate articolele care pot fi evaluate Centrul Logare Clienţi.
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
DB
Simple yet Elegant
David B. 6946 08.04.2018
These were bought for a Harley Benton PB-50 mod project. Iwas going for the original 50's look so string through body was a must.
Since the PB-50 was ordered from Thomann it made sense to order the bushings too. The price was also better than I could find in the UK.
Very easy to fit. Once I'd position my 2 saddle bridge I bored pilot holes then flipped the bass over. A 9.5mm countersink finished the drilling. A tap with a rubber mallet saw the bushings secure.
If you want the bushings lying flush with the back of the body use a 12.5mm flat bit to the depth required (2mm I found) before using the countersink.
No "cons" were discovered. It's a very simple product that works well. Highly recommended.
You can see the finished PB-50 on bassic.de, basschat.co.uk, onlybass.com and talkbass.com. look for posts by kodiakblair.
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
S
Solid and well made.
SeanMandrake 08.09.2015
Sturdy. Good quality. Appears to be a brightly plated brass. Ideal for an upgrade or, as in my case; retrofitting a bass string to a guitar. Only as deep as it needs to be so should fit thinner bodies well.