Millenium Rackstand 4U

103

Rack Stand 4 U

  • Thread for M5 screws
  • Dimensions without screws (W x H x D): 515 x 225 x 358 mm
  • Colour: Black
  • Including 8 screws
Disponível desde Setembro 2018
número de artigo 442734
unidade de venda 1 peça(s)
usable height in U 4 U
Material Steel
Wheels No
Type Tabletop Stand
Height min. 255 mm
Height max. 255 mm
Special Design No
Weight 1,2 kg
Mostrar mais
€ 10,60
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Entrega entre aprox. Quarta, 8.05. e Quinta, 9.05.
1

103 Avaliações de clientes

3.4 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

estabilidade

acabamento

77 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
K
yeah, but no
Kristaps 28.10.2021
So it is supposed to be a 4 unit rack, but... On top there are this pole that holds it together, it is in a way of putting a 1st unit... But, i just got rid off the pole and it is holding together by the unit, so no problem there, unless you want to change units often. 2nd and 3rd unit, ok, BUT in 4th unit, that is in bottom, you can not putt anything that's deeper then few cm... So, not a full 4 unit stand, BUT, it is quite sturdy and really cheap... So basically, it is a 3 unit rack for few euros.
acabamento
estabilidade
5
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
AF
A very badly designed product
Ashain Fernando 14.11.2020
Though the item is described to be a 4U unit, the maximum number of 1U units this can hold is only 2. Though is is very sturdy, the rack is very badly designed.
acabamento
estabilidade
5
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
CM
Very poor design but usable for some things
Clavis Muziek 23.01.2023
I bought this to be able to put my 1U effects processor (Alesis Quadraverb GT) on the ground or next to me when I'm doing a show. It is impossible to insert large machine into this rack. You can only use it for small to medium sized depths. And I estimate no more than 2 or 3 units depending on the depth of your machines. Also a big negative point is the accuracy of the holes. Some of them just are little bit too narrow for the included screws. So be prepared to use a drill to adjust some of the holes a bit.
acabamento
estabilidade
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
P
Not usable
Phonocat 04.02.2020
It's absolutely not usable. It can be used only for very not deep equipment, like level meter etc. Forget hooking up anything deeper than 12cm.
acabamento
estabilidade
6
0
Reportar a crítica

Reportar a crítica