Adam Hall STRS6U Rack Stand 6U

149

Mostrar tradução

Rack Stand 6U

Black
Threads for M5 screws
12 Screws included
Weight: 1.6 kg

30 30 dias dinheiro de volta

3 Thomann garantie de 3 anos

Disponível desde Fevereiro 2012

número de artigo 277570

unidade de venda 1 peça(s)

Type Tabletop Stand

Height 310 mm

Weight 2,2 kg

Mostrar variações deste produto

149

Adam Hall STRS6U Rack Stand 6U

Adam Hall STRS6U Rack Stand 6U Rack Stand 6U * Black * Threads for M5 screws * 12 Screws included * Weight: 1.6 kg...

€ 22,90

Para o artigo

286

Millenium RW-2001

Millenium RW-2001 19" Carriage with Rollers * Solid 12U construction with adjustable 8U bottom * Load bearing capacity u...

€ 66

Para o artigo

145

Millenium Rackstand 12U

Millenium Rack Stand 12U Rack Stand * Size: 12 U * Free-standing open rack * Material: Steel * Thread for M5 screws * De...

€ 15,70

Para o artigo

150

Millenium Rackstand 6U

Millenium Rackstand 6U Rack Stand 6 U * Thread for M5 screws * Dimensions (W x H x D): 48 x 29.5 x 35.5 cm * Including 1...

€ 12,60

Para o artigo

103

Millenium Rackstand 4U

Millenium Rackstand 4U Rack Stand 4 U * Thread for M5 screws * Dimensions without screws (W x H x D): 515 x 225 x 358 mm...

€ 10,60

Para o artigo

164

Adam Hall STRS12U Rack Stand 12U

Adam Hall STRS12U Rack Stand 12U Rack Stand * 12 U * Threads for M5 screws * 24 Screws included * Weight: 2.2 kg * Colou...

€ 20,90

Para o artigo

€ 22,90

IVA incluído, € 20 de portes de envio adicionais

Entrega entre aprox. Quinta, 9.05. e Sexta, 10.05.

190

Posição de vendas

em Estantes e tripés de estúdio

149 Avaliações de clientes

5 61 Clientes 4 48 Clientes 3 30 Clientes 2 6 Clientes 1 4 Clientes

4 / 5

estabilidade

acabamento

Diretrizes de apreciações

79 Críticas

buno gomez 13.04.2017

O artigo é bastante funcional.

Pelo tamanho, é o indicado!

As borrachas, fazem toda a diferença, bastante silencioso o que é de todo conveniente.

Rápida montagem!

Excelente packing!!

Reportar a crítica

Acredita que esta classificação seja por alguma razão imprecisa ou incaceitável? Indique-nos por favor a justificação na caixa de texto em baixo e se possível o seu endereço de email para eventuais questões.

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

6U Rack stand that is really only a 4U

Gerard1742 14.09.2015

This stand is a decent stand. It is tough and seems to be built well. The metal seems of good quality for sure. However, the stand has a big down side in regards to its function. There is a support strut that goes across the top of the stand. Well this pretty much rules out the chance of installing any 1u rack device. You just cannot avoid this strut. So your robbed of basically the top 1u slot. The next thing that robs you of another 1u is the fact that the stand is too low to allow the bottom 1U space to be filled. As others have said this stand is more like a 4U.

I guess it's down to poor design that two 1U slots are made redundant. So be careful in your choice of stand. Luckily there was no great urgency for me to have 6U, I just chose this stand for the extra space available if I need it perhaps in the future.

One other thing, which is not a big deal, but it would have saved some time. There is no guide on how to setup the stand. It is straight forward but a simple diagram would have helped. Must things come with set up diagrams, it's not a big ask to have had one supplied. I had to go onto the website again to see what the stand looked like so I didn't install the strut and the rear bar in opposite positions.

Performance wise the stand holds up well. It seems quite sturdy and so long as it's not abused it will hold your rack gear no problem. Obviously it will not take a huge 4U rack PA as this would just be too heavy. But it will hold your 1 U preamps and EQs and noise gates with no issues and it sits very stable on a flat surface such as a desk or cabinet.

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Well Made Rack

ImAndi 05.05.2015

Hey, babe. Nice rack!

Thanks, it's the Adam Hall STRS6U and boy is it sturdy! Fill it up and it's even sturdy enough to use the top horizontal bar as a handle, depending on the weight of course.

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

I confirm the other reviews

BattleAngel 02.08.2021

Screw holes are badly made. I had 2 screw holes totally unusable. I would need to drill and remove metal elements that are blocking screws from a normal screwing. So immediately, 1U is totally unusable.
If not that, then top 1U would be actually totally usable on the contrary to other comments. This top bar/rod doesn't need to be mounted.
The stability is excellent. After mounting just 1U unit, it has become stable already. Now when I have 3U filled, there's nothing to complain. It sits on my desk, and even that small part of it is beyond the desk, it's super stable.
I bought this rack for two devices: Focusrite Scarlett 18i20 (second from the top) and Behringer Model D on the bottom (but not at the very bottom because holes in the rack ears didn't let me put it lower.

Reportar a crítica

Ler todas as reviews

Adam Hall STRS6U Rack Stand 6U

Rack Stand 6U

149 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

79 Críticas

Navegador inteligente

Artigos recentemente vistos

Compre e pague em segurança

Os seus benefícios

Serviço

Servido com amor!

Adam Hall STRS6U Rack Stand 6U

Rack Stand 6U

Acessórios e artigos correspondentes

149 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

79 Críticas

Comparar opções

Navegador inteligente