Palmer CAB M Merger

246

Passive Cab Merger

  • 2 Inputs
  • 2 Outputs
  • Boxes can be connected in series or parallel
Produkt dostępny od Maj 2013
Numer artykułu 314812
Jednostka sprzedaży 1 szt.
Type Merger
LED Display No
PSU Connector No
Shape Floor Effects Pedal
MIDI Interface No
125 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Szacowana dostawa pomiędzy Środa, 5.06. and Czwartek, 6.06.
1

246 Oceny klientów

4.9 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

właściwości

wykończenie

144 Opinie

MJ
It is what it is. Not more, not less...
Marcin Julius 29.05.2024
Many amps have only one speaker output so with this device you can extend your possibilities, add an extension cab to your combo or use 2 cabs for your head.
It's a very simple product, anyone with basic soldering abilities could make one but it is so cheap you can't even get normal component and housing for this price. Worth to have one even if you won't use it regularly.
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
SE
Smart solution for running multiple speakers
Staffan E. 02.02.2014
I have a Two Rock Classic reverb 1x12 combo and sometimes a want to use a external cab to get some more stage volume. I want to use both the internal speaker (8 ohm) in the combo and the external cab (8 ohm). The problem is that the amp has (like many other amps) a set of speaker outs - a 4 ohm, a 8 ohm and a 16 ohm jack. If I use the internal speaker the 8 ohm jack is used. If I was to insert the external cab (8 ohm) into one of the other jack there would be a miss match. This is where the cab merger comes in. It lets you insert both the internal speaker and the external cab into the cab merger and then you run a speaker cable from the cab merger into the amp giving in my case either 4 ohms in paralell or 16 ohms in series. Great little devise!
właściwości
wykończenie
6
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
P
The magic tool everyone should have....
PolMol 03.01.2019
...if you're that kind of guy full of different guitar cabs and amps in your house ;) Not having the right impedence in your cabs and/or amps is not a problem anymore
właściwości
wykończenie
3
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Good problem solver
Adrian866 13.07.2020
I use this for connecting various cabs to various tube amp heads. The Palmer device allows me to use combinations of two cabs without impedance mismatch issues, eg two 8 ohm cabs into a 16 ohm output.

I agree with another reviewer on two points:
1. The text rubs off quite easily. I've sprayed some clear acrylic on it to help reduce this.
2. Can be a squeeze if you use super chunky speaker cables.

However, overall. excellent little problem solver and good value for money.
właściwości
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie