ObsidianWire T 3-Way Universal Harness

7

Solderless Electronics Replacement Set for Electric Guitar

  • For T-style guitars with humbucker
  • 4 Optimised modes: HH, HS, SH & SS
  • Intelligent circuit: 500 kOhm for humbucker & 250 kOhm for single coil
  • Treble bleed prevents treble loss at low volume control settings
  • Controls: Volume, tone
  • Switch positions: 1: bridge, 2: bridge & neck, 3: neck
  • With the highest quality components for a significant improvement over standard electronics
  • Made in New Zealand

Delivery contents:

  • Volume control: 1 x CTS 500/250 kOhm, logarithmic, fine grooved split shaft (24 spline for US guitars & potentiometers)
  • Tone control: 1 x CTS 250 kOhm, logarithmic, finely grooved split shaft (24 Spline for US guitars & potentiometers)
  • Capacitors: 150 series polyester 0.022µF
  • Switch: Oak Grigsby 3-way switch
  • Jack socket: 1/4" mono
Produkt dostępny od Styczeń 2024
Numer artykułu 580493
Jednostka sprzedaży 1 szt.
Design Normal
Resistance Value 500/250 kOhm
Characteristic Curve Logarithmic
Thread Length 9,5 mm
Tandem Poti No
Push/Push No
Solderless No
shaft type grooved
Type Switcher
Colour Silver
Pokaż więcej
489 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Środa, 12.06.
1

7 Oceny klientów

4.9 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

6 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
K
If you’re looking for flexibility…
Kokkaya 09.06.2024
This is the harness for you.
I wrote a rather neutral review for Obsidianwire earlier this year (for single cut harness) because of too soft of pots and mediocre 3 way toggle switch.
This time they nailed it. The cap is 0.22nF, which I like a lot for single coils and not many suppliers provide S or T type harnesses with 0.22. Plus, you can go 500K or 250K with pots. You can even assign 250 and 500 to different pickups thanks to the clever circuit. This is a very flexible and usable harness. Switch, output jack and solderless terminal are of good quality.
Important points that are not mentioned in the product description:
The pots are split shaft but solid shaft ferrules are included in the package! Which is a very good thing as you can use your screwed in standard tele knobs.
And switch screws are also included in the package. This is a huge bonus again. Switch tip was included in the single cut harness but is not included this time.
Overall, I like this purchase. Many thanks Thomann for carrying all this kinds of stuff.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie