TonePros T3BT-N Tune-o-matic

38

Tune-O-Matic Bridge

  • Lockable Nashville-style bridge
  • Pre-notched
  • Metric version for Asian models (Epiphone etc.)
  • Holding pin
  • String spacing: 10.4 mm
  • Pin spacing: 74 mm
  • Pin diameter: 6 mm
  • Finish: Nickel
katalógusunkba bekerült: Augusztus 2005
Termékszám 183681
mennyiségi egység 1 darab
Colour Nickel
Design Tune-O-Matic
Single Rider Yes
String Holder No
28 290 ft
ÁFÁ-val, plusz 6 900 ft szállítási költség
Azonnal szállítható
Azonnal szállítható

A termék raktáron van és azonnal szállítható

Szállítással kapcsolatos tájékoztató
Szállítás megközelítőleg Szerda, 8.05. és Csütörtök, 9.05. közt.
1

38 Ügyfelek értékelései

4.9 / 5

A termékek értékeléséhez kérjük, jelentkezz be.

Megjegyzés: Mivel szeretnénk megakadályozni, hogy az értékelések szóbeszéden, hiányos ismereteken alapuljanak, vagy rejtett reklámok legyenek, csak valós ügyfeleink számára tesszük lehetővé értékelések írását, akik valóban tőlünk vásárolták meg a terméket.

A bejelentkezést követően az ügyfélközpontban, a "Termékek értékelése" menüpont alatt megtalálsz minden terméket, amelyet lehetőséged van értékelni.

kivitelezés

20 Vélemények

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
A
Top Quality bridge
Anonim 09.01.2016
I got this for my Epiphone Les Paul a few years back and was amazed at just how good it was.

Build quality is excellent.

It was easy to install (the saddles were pre-slotted), and you can just use your existing bushings if you want, but I used the ones that came with it.

Setting the intonation is a breeze as the travel on each of the saddles is smooth and does not suddenly jump like the stock Epiphone, or even Gibson, bridges. There is also more travel, so whatever your action setting, you can dial in the intonation with no problems. Once you have got everything set as it should be, you use the little allen key screws to lock the bridge in place.

What I really liked about this bridge though, was when I checked the intonation again over a year after installing it - still spot on, despite numerous string changes (my sweat eats strings), fret polishing, oiling the fretboard etc - it hadn't budged at all!

Loved it so much that I when I needed to replace the bridge on my Gibson SG, I headed straight for the imperial version of this bridge.
kivitelezés
3
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
A
Good but wouldn't buy again
Algirdas 21.05.2013
It's a good item but definitely not worth the price. It's the same Gotoh Tune-o-matic (yes, it is made by Gotoh and it says so on the bottom of the part) but has two set screws and is twice more expensive. Of course, it's nice to have a bridge that doesn't fall off when you remove the strings but the advertised tonal improvement is highly questionable. Furthermore, it's a cast brass bridge, just like the cheap ones. If you want a significant tonal improvement and better build quality, I would suggest saving a little bit more money and buying a machined brass bridge.
kivitelezés
3
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
T
Really nice tune-o-matic
Taoki 01.02.2020
I replaced my Epi bridge with this one and it feels like an upgrade setting aside the locking features which are really convenient, the overall quality of TonePros is better than a regular tune-o-matic bridge for a reasonable price.
kivitelezés
0
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
V
Vladi1 03.01.2020
The nickel plating started fading quickly, but I've had this happen on all my bridges, so I can't blame this one. Maybe my hands are toxic idk.
kivitelezés
0
0
Jelentem!

Jelentem!