Rockboard S-Connector nickel

356

Straight Pedal Connector

  • Length (plug to plug): 12 mm
  • Allows for the shortest possible connection of two pedals
  • For pedals with side-mounted sockets
  • Suitable for pedals with side panels at a 90° angle to the floor
  • 6.3 mm Mono jack socket on both sides
katalógusunkba bekerült: Február 2017
Termékszám 404982
mennyiségi egység 1 darab
Length 1,2 cm
Colour Silver
Connector 1 Jack 6,3mm TS male
Connector 2 Jack 6,3mm TS male
Connector from 6,3mm TS Jack
Plug out Jack 6,3mm TS male
Mutass többet
769 ft
ÁFÁ-val, plusz 6 900 ft szállítási költség
Azonnal szállítható
Azonnal szállítható

A termék raktáron van és azonnal szállítható

Szállítással kapcsolatos tájékoztató
Szállítás megközelítőleg Kedd, 14.05. és Szerda, 15.05. közt.
1

356 Ügyfelek értékelései

4.4 / 5

A termékek értékeléséhez kérjük, jelentkezz be.

Megjegyzés: Mivel szeretnénk megakadályozni, hogy az értékelések szóbeszéden, hiányos ismereteken alapuljanak, vagy rejtett reklámok legyenek, csak valós ügyfeleink számára tesszük lehetővé értékelések írását, akik valóban tőlünk vásárolták meg a terméket.

A bejelentkezést követően az ügyfélközpontban, a "Termékek értékelése" menüpont alatt megtalálsz minden terméket, amelyet lehetőséged van értékelni.

kivitelezés

172 Vélemények

g
Ár/érték arányban jó választás
glezmen 03.03.2023
Nehéz informatívat mondani egy ilyen egyszerű termékről. A minőségérzet jó, masszívan ül a helyén, nem csúszkál, nem laza. A gyártótól patch kábeleket használtam eddig, panaszom nincs rájuk, ahogy erre sem.
kivitelezés
0
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
b
Don't buy this style of connector.
benash 13.10.2018
Ive recently been building a pedal board for the function band shows I do. I own couple of Boss Pedals and have been trying to find a way to take up as little space as possible on my board. Usually this style of connector wouldn't be possible, but as I am using the same company pedals, the jack sockets line up perfectly... or so I thought.
I plugged two pedals in, and they seemed to work perfectly. So I wired everything up and took them on a gig. Cut a long story short, everytime I hit either of the pedals, there was a weird crackling sound. So after the gig the next morning I ran a few tests. Basically even though the Boss pedals appear to have the jack socket in exactly the same place, they're ever so slightly different. So whenever I pushed on one pedal, It would act as though I was pressing down on the jack socket on the other, therefore creating the noise.
Its a shame as these connectors are cheap, and small. As an alternative, I recommend "Rockboard" or 'EBS" patch leads. Thomann sell both. No noise, and equally as compact.
kivitelezés
4
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
k
kostas_v 09.07.2018
I bought this to connect some guitar pedals and for what this connetctor is, it has decent build quality and doesn't create unnecessary noise. You really should look into connectors like these before buying them, though.

In most cases these are unsuitable to connect pedals from different brands as they place the jacks at different heights. Even on pedals from the same brand, due to imperfections or slight differences in manufacturing, the jacks may be at slightly different heights, and you can't really connect more than 3-4 pedals without noticing some obvious curvature. This puts strain on the jacks and could potentially damage them, especially when you press down on them.
You don't save THAT much space either, especially if you have flat patch cables, in which case, they take up about the same space. Overall, you should probably look into getting some patch cables if you're looking to use them on a pedalboard.
kivitelezés
1
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
a
Very good construction and operation
aZu 11.11.2020
Very good construction and operation, it does the job pretty well.
Its size allows you to save a lot of space on "crowded" pedal boards.
The optimal use situation is of course that between two pedals of the same brand or that have the INs and OUTs positioned at the same height on the sides.
kivitelezés
0
0
Jelentem!

Jelentem!