Rean NYS 322

171

DIN Connector

  • 5-Pin
  • With metal sleeve
  • Maximum cable diameter: 5 mm
  • Made by Rean (registered Trademark of Neutrik AG)
Termékszám 121360
mennyiségi egység 1 darab
Build In No
Plug DIN 5-pol. (MIDI) male
649 ft
ÁFÁ-val, plusz 6 900 ft szállítási költség
Mennyiségi kedvezmény
Darabár Megtakarítás Mennyiség
649 ft 1
619 ft 4,6% 20
599 ft 7,7% 50
Azonnal szállítható
Azonnal szállítható

A termék raktáron van és azonnal szállítható

Szállítással kapcsolatos tájékoztató
Szállítás megközelítőleg Szerda, 15.05. és Csütörtök, 16.05. közt.
1

171 Ügyfelek értékelései

4.7 / 5

A termékek értékeléséhez kérjük, jelentkezz be.

Megjegyzés: Mivel szeretnénk megakadályozni, hogy az értékelések szóbeszéden, hiányos ismereteken alapuljanak, vagy rejtett reklámok legyenek, csak valós ügyfeleink számára tesszük lehetővé értékelések írását, akik valóban tőlünk vásárolták meg a terméket.

A bejelentkezést követően az ügyfélközpontban, a "Termékek értékelése" menüpont alatt megtalálsz minden terméket, amelyet lehetőséged van értékelni.

kivitelezés

59 Vélemények

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
MM
The only decent MIDI plug I could find
Mike MK 06.04.2020
I'm using these connectors for making my own MIDI cables in my quite specific studio setup.

Pros:
- excellent price to quality ratio
- sturdy with proper strain relief
- metal casing
- easy to solder
- fit well in all MIDI sockets

Cons: none

I've been using these for quite some years now. Some users might find it irrelevant but I like how these plugs slide into all MIDI sockets on all of my devices, while I hade some ready made cables that had to be plugged in and out with decent force.

While not a con, I'd like to see more variants of this connector, e.g. 90 degrees angle, etc.
kivitelezés
1
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
A
High quality connector
Anonim 12.03.2014
I use this one for an old Philcorda which has an 5 pin audio output. I also used cheaper ones but i really prefer this one. First of all the metal case is really stable and solid. Then the cable relief and rubber break protection is also very solid. At least the connection pins inside are very easy to solder. The solder almost sticks to the pins. This is a mess with the cheap ones. Espacially becaus there are five of the pin connectors and they´re very small. So if you want a long live, easy to solder connctor invest the more bucks ans go for the neutrik! I only used it for audioconnections. Don´t know how it works for Midi.
kivitelezés
2
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
A
Easy to solder
AdrianoGominho 13.02.2021
Using these to make my own midi cables. These are easy to solder and seem sufficiently robust to withstand frequent handling.

The fitting between the metal case and the plastic core is very tight. On one connector the case was slightly ovalized, not that this could be visible to the naked eye, but enough to prevent the plastic core to slide to its position. A gentle press on the metal opening with a suitable sized drill was enough to sort this out, but if I had not the proper tools I would be stuck with an unusable item.
kivitelezés
0
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
P
good
Pjanoz 22.10.2018
Its very nice quality but Ive had some where the rubber protection cracked.
kivitelezés
1
0
Jelentem!

Jelentem!