Gravity MSQT 1B Mic adapter

91

Microphone Adapter

  • Ball joint with guiding groove (maximum 90° tilt)
  • Microphone/Tripod 3/8" thread
  • Powder coated aluminium
  • Height: 55 mm
  • Colour: Black
  • Black ring set included
katalógusunkba bekerült: Június 2016
Termékszám 388827
mennyiségi egység 1 darab
5 699 ft
ÁFÁ-val, plusz 6 900 ft szállítási költség
Azonnal szállítható
Azonnal szállítható

A termék raktáron van és azonnal szállítható

Szállítással kapcsolatos tájékoztató
Szállítás megközelítőleg Csütörtök, 2.05. és Péntek, 3.05. közt.
1

91 Ügyfelek értékelései

4.2 / 5

A termékek értékeléséhez kérjük, jelentkezz be.

Megjegyzés: Mivel szeretnénk megakadályozni, hogy az értékelések szóbeszéden, hiányos ismereteken alapuljanak, vagy rejtett reklámok legyenek, csak valós ügyfeleink számára tesszük lehetővé értékelések írását, akik valóban tőlünk vásárolták meg a terméket.

A bejelentkezést követően az ügyfélközpontban, a "Termékek értékelése" menüpont alatt megtalálsz minden terméket, amelyet lehetőséged van értékelni.

kivitelezés

56 Vélemények

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
H
Total control of mic placement
Handreas 06.03.2020
This thing makes it incredibly easy to point a mic exactly where I need it. Very useful in combination with a gooseneck or amp-clamps. I highly recommend having one or two in your mic case.
0
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
A
Always handy, strong, but with a quirk
Animale 01.08.2020
For even more versatility with mic positioning.

It has some decent strenght in it to experiment with other applications when it's not in use.
Now I hung up a laptop plate on a mic. boom arm to angle it in position..it holds up very well. And it stays that way.

But I had the issue of having to go through quite a hussle being able to screw it tight when having found a perfect angle.
This issue has been brought up by several other reviewers as well.

That's not caused by using (or not using) tightening rings, it;s the way this thing is made. It's the 'quirk' it possesses.

So my personal verdict:
Very good clamping power (it holds a tray with a laptop in an angle with confidence, so heavy mikes for sure), but this one needs a build in bottom lock ring, otherwise you're going to hassle to lock the position with every more-than-standard application, like working in tight spaces.
kivitelezés
0
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
A
Perfect multifunctional 3/8" angle-adapter
Anonim 18.11.2016
This adapter was just what I a needed for a long time and I am very happy that I finally found this product, of which I immediately ordered 2 pieces.
The build-quality is very good and the price is fair.

It helps me to deal with at least 3 of the following situations:

Miking a grand piano with Manfrotto Super Clamps or Mini Clamps. When using this clamps to attach microphones on the edge of or completely inside on the metal frame, you would miss a way to freely angle the microphones without these adapters.

Miking an upright piano with a X-Y bar in a stereo configuration. The adapter is attached between the end of the boom of a normal or overheard mic stand and the stand can be placed either on one side or at the back of the piano. This way you can always correctly align the bar.

Positioning of a Zoom recorder or any other microphone that have limited or no angle settings on a mic stand. Mind that for the Zoom you will need an adapter to go from 3/8" to 1/4".

Update: I noticed after first using both units at the same time that one of the units is faulty. There is an area, where both mounting points are aligned in a straight line, that the adapter keeps being loose after completely fastening with the knob. This means that one of the two units that I purchased is useless.
Because this is with one out of two and fastening is the major function of these fairly simple adapters, I consider this as poor quality. This degrades my number of stars from 5 to 2.
1
1
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
a
ateb 17.12.2020
Useful but it could be better
kivitelezés
0
0
Jelentem!

Jelentem!