Doepfer A-149-2

14

Eurorack module

  • Expansion module for the A-149-1 (Article Nr: 199098)
  • Supplies 8 digital, random voltages
  • Eurorack format
  • Width: 4 HP
  • Depth: 35 mm
  • Power requirement: +40 mA (+ 12V) / -10 mA (-12V)

Note: Must be mounted directly to the left or right of the A-149-1, as an internal connection must be established between both modules. Can not be operated without the A-149-1!

katalógusunkba bekerült: December 2006
Termékszám 199100
mennyiségi egység 1 darab
Width 4 TE / HP
23 890 ft
ÁFÁ-val, plusz 6 900 ft szállítási költség
Azonnal szállítható
Azonnal szállítható

A termék raktáron van és azonnal szállítható

Szállítással kapcsolatos tájékoztató
Szállítás megközelítőleg Csütörtök, 6.06. és Péntek, 7.06. közt.
1

14 Ügyfelek értékelései

5 / 5

A termékek értékeléséhez kérjük, jelentkezz be.

Megjegyzés: Mivel szeretnénk megakadályozni, hogy az értékelések szóbeszéden, hiányos ismereteken alapuljanak, vagy rejtett reklámok legyenek, csak valós ügyfeleink számára tesszük lehetővé értékelések írását, akik valóban tőlünk vásárolták meg a terméket.

A bejelentkezést követően az ügyfélközpontban, a "Termékek értékelése" menüpont alatt megtalálsz minden terméket, amelyet lehetőséged van értékelni.

kezelés

tulajdonsagok

hangzás

kivitelezés

5 Vélemények

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
J
Doepfer random voltage extender module.
Jonathan64 11.09.2013
This module cannot be used on it's own, but rather is intended to provide additional facilities for the A-149.1 which generates random voltages (which can be quantised). It provides eight digital outputs each of which switches at random but synchronised to the clock input of the A-149.1. I have found it useful for generating random "note on" and "note off" signals when creating random self-generating musical sequences (Stochastic music). Used in combination with a logic module A-166 a useful range of signals can be generated at different time intervals to make the music more interesting to the ear, rather than all the notes being the same length. There are numerous other uses for randomly generated logic signals in a modular system apart from triggering envelope generators.
1
0
Jelentem!

Jelentem!

google translate se
Sajnos hiba történt. Kérjük, később próbálkozz újra.
M
Add some randomness to your rig
Monkeproggs 18.11.2020
This module sends gate/trigger signals at random when connected to Doepfer A-149-1. You feed the A-149-1 with a clock and this module spits out random gates/triggers each clock advance.
" It makes available 8 digital random
voltages (i.e. only low/high states like a gate signal)."
This module doesn't send out any random voltages, it sent out 10V on random outputs.
But it is very useful for triggering gates/filters/notes at random. I use it often to trigger the gates in my Behringer Multiple/gate Switch, thereby allowing modulation through at random. I also use it with a Logic circuit to decrease the probability of a output going high. For instance I have one output from this connected to an AND gate and another from my clock divider 1/13 output to the same AND gate. This example would giva a probability of an event happening 1/13+1/X.
The randomness of the outputs are fairly even and sometimes if feels like it is running through a chain, but for the most part it does the job.
I'm very pleased with this module and would higly recomend it to anyone interested in Generative systems or daring explorers.

The only downside is that it seems that all outputs are more prone to turning high than low so if you just use this as a trigger it will be firing a lot. So perhaps buy a logic module as well.
kezelés
tulajdonsagok
hangzás
kivitelezés
0
0
Jelentem!

Jelentem!