Stairville Mini T-Bar 2 - Ø 36mm

152 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.5 / 5.0
  • quality
16 written ratings
Total
quality
Great little bar with multiple uses.
Kevin6046, 02.03.2019
I actually had a different use in mind for these bars. I use them upside down and have attached them to the rigging points on top of my Yamaha dsr 15 speakers with a 12mm ( I think ) bolt. I then cut a short piece of old speaker stand tube, the 35mm stuff, and put it in the hole, and used this to support a t bar with four lightweight pars on it. It?s great for when you are on a little stage and can?t squeeze another set of stands in. If you don?t have your cabs too high, the whole thing is remarkably stable and not dangerous at all. You can also link two of these together with pipe and use them on top of a speaker with a couple of light fittings as intended.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Verry good
LNLRental, 29.10.2019
This T bar is very stable and good quality
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Excellent for space saving on small gigs
30.08.2014
I bought this to reduce a T-Bar for 4 par cans side by side to two par cans underneath the bar and two above. This was especially for small venues where the long T-Bars can take up too much room. This product is perfect for this use. Having a slot rather than holes means that positioning the lights is much easier and you can get them into a perfect position. A great product at a great price.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Practical and durable
RipChord, 28.11.2018
I got this to mount my light bar onto the support pole. It works like a dream. Solid construction and beefy screw knob. What's not to love?
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Great stand adapter for 2 light fixtures
Rev Rat, 14.09.2018
I have a couple of these and they form a great addition to my kit. Turns spare speaker stands into solid and stable stands for 2 lighting fixtures.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
simple universal use
28.02.2017
great item suitable for virtually the entire Speaker stands. I used it for approval of moving heads on them. but can also be used for fixing other objects such as speakers, lighting or as a transition to someone else can be fixed.

versatile sound great pric
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Space saving, great result
jazzman11, 14.11.2017
I bought 2 of these T-bar's, The product reduces my weight and size of my lighting set-up. Changed the bolts to Quick release fittings as there were no washers supplied!
I am very pleased with the result, I can now set up quickly, also no need to use the over head lighting stand on my Equinox Booth. Great Result, be good if I could sent Thomann a Picture.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Ideal for mini Heads
06.11.2016
these are ideal for small fixtures but would not support a full blown moving head I have two mini moving heads on each one and they work fine. the only problem I had was that the fixture diameter was to big for my poles, but soon fixed that with a sleeve purchased for penny's at my local hardware store. they solve the problem of those 1mtr bar tops and keep my show more compact.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Good compact bar
MikkoS, 19.05.2014
Good for lightweight fixtures. Perfect for my rgba studio 4 x 8 w ledpars but bar is bit too thin for two conventional par 64s. I really like all my gear to be as compact as possible and I don't like to use 4-bars in my designs.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Henry9665, 09.07.2014
super-helpful T-bar when you want to hang few lights (and you don't want the extra length of normal crossbars sticking out)!

However, I think they should make the metal just a little bit stronger :)
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
no problems
Sherwood Sofa Meister, 18.02.2015
Works fine, well made, good price!
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Great for LED fixtures
21.03.2017
I bought two of these to use with smaller LED lighting effects like Par Cans and Radius lights.
Tight fit on the top of a mounting pole, Includes Nuts and Bolts but I would recommend supplying extra washers for a secure connection to lights etc.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Really handy
20.09.2016
Must have accessory for me, helps a lot with placing my lights on poles :) Cheap as well.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Very versatile piece of hardware
Dave1782, 15.05.2014
I used this to mount a projection screen onto and existing lighting stand and it worked splendidly. I know this is not what it was meant for but I'm sure it's also fine for mounting a couple of fixtures too.
You couldn't make something like this for the price Thomann are charging so it was a win win situation.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
Good quality and stable mini t-bar
KarolM, 21.01.2015
I orderder this because occasionally I needed to put lights on my standart speaker stands. It is very stable and durable. I think you can't find better alternative for the price.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Total
quality
Very handy
Konstantinos A., 17.09.2016
Really handy for many lighting applications. The only extra thing I wish it had is 2-4 washers for the screws.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report

Stairville Mini T-Bar 2 - Ø 36mm

9,90 €
Including VAT; Excluding 20 € shipping
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-45
FAX: +49-9546-9223-443
Phone: +49-9546-9223-35
FAX: +49-9546-9223-24
(8)
Recently Viewed
Behringer Pro-1

Analogue Synthesiser Dual VCO design based on CEM3340, Sawtooth and pulse waveform for VCO A, Sawtooth, Triangle and Pulse waveform for VCO B, Pulse Width Modulation, Noise generator, 24 dB low-pass filter with resonance, 2 ADSR envelopes for VCF...

Recently Viewed
Soundboks The New Soundboks

Soundboks The New Soundboks, powerful portable battery powered outdoor speaker system, Mercus Audio Eximo® 3 x 72W intelligently class-d amplifiers that reach levels up to 126dB, 2 x10" low frequency speakers + 1x high frequency tweeters, connections: Bluetooth 5.0, TeamUP...

Recently Viewed
Mackie ProFX12v3

12-Channel mixer 7 Microphone inputs with 3-band EQ, 4 Inserts and 4 one-button compressors, Channels 5-10 have microphone inputs and stereo line inputs, 1x 3.5 mm Stereo jack Line input, 2x4 USB Interface, Built-in GigFX effect unit with 24...

Recently Viewed
Singular Sound Aeros Loop Studio

Singular Sound Aeros Loop Studio; Effects Pedal; 4.3" touch-enabled screen with color coded cues and waveforms; 6 parallel tracks and 6 song parts for a total of 36 distinct loops per song and in simultaneous parallel and sequential looping; Unlimited...

Recently Viewed
Levys Pad. Garm. Leather Strap 3" BK

Strap for electric guitar and electric bass Strap material: Leather, Length adjustment: Ladder adjustment system, Upholstery: Foam, Width: 76 mm, Length adjustable from 94 cm to 130 cm, MSS2 BLK, Colour: Black, Made in Canada

Recently Viewed
Harley Benton PB-20 SBK Standard Series

Electric bass Body: Lime, Screwed neck: Maple, Fretboard: Amaranth, DOT fretboard inlays, Neck profile: Modern "C", Scale: 864 mm, Nut width: 42 mm, 20 Frets, Double-Action truss-rod, Pickup: 1 PB-Style split coil, 1 Volume and 1 tone control, Classic...

Recently Viewed
Yamaha Bag THRBG1

Yamaha Special Bag THRBG1; original Yamaha Bag with THR5, THR10, THR10II, THR10IIW and THR30IIW; with shoulder strap, and outer pocket

Recently Viewed
Casio CT-S300

Keyboard 61 Velocity-Sensitive keys, 48 Voice polyphony, 400 Sounds, 60 Preset-Songs, Reverb, Volume Sync EQ, Learning Function, Automatic accompaniment, 77 Preset rhythms, One-touch preset, Dance Music mode, Registering, Pitchbend wheel, Connect to the free Chordana Play For Keyboard learning...

(1)
Recently Viewed
Roland JU-06A

Synthesizer module Digital replica of the Juno-60 and Juno-106 synthesizers, 4-Voice polyphony, Based on ACB technology, Switchable between Juno-60 / Juno-106 mode, Arpeggiator and 16-step sequencer, Chord memory function, Analog clock input (3.5 mm Jack), Integrated USB audio interface:...

Recently Viewed
JHS Pedals Cheese Ball - Fuzz Distortion

JHS Pedals Cheese Ball - Fuzz Distortion; Effects pedal; Lovetone Big Cheese replica; Analog mode; True Bypass; Volume, Gain and Tone controls; 4-way switch to select four gain and tone settings; Bypass footswitch; Status LED; Metal enclosure; 6.3 mm mono...

Recently Viewed
Takamine TKSS3 Guitar Strap Grasflower

Guitar strap Made by Levy's, Material: Suede leather, Width: 7 cm, Length adjustable from 100 cm - 140 cm, With Takamine Logo, Design: Grasflower, Colour: Black, Made in Canada

Recently Viewed
Mackie ProFX16v3

16-Channel mixer 11 Microphone inputs with 3-band EQ on all channels with variable medium-frequency control (channel 15/16 has a standard 3-band EQ), 8 Inserts and 8 single-knob compressors, The channels 9-14 have microphone inputs and stereo line inputs, 1x...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.