A
Nicely engineered
If you have ever bought a secondhand guitar with a Floyd Rose tremolo unit, it is reasonably likely that there will be a degree of play in the bar. People try various methods to shim the bar with PTFE tape or some other material, but it is far better to fix the problem properly by replacing the bar assembly with this item.
Basically you whip out the bridge unit, use a spanner to remove the bar holder assembly, and replace with this one. Job done! You may even find that this arm fits into your exising holder, in which case you don't need to replace the whole assembly.
Some licenced floyds may have unusual sizing but this defnintely fits Floyd Rose brand bridges.
You can usually be confident of good engineering with Schaller, and that is the case here.
Basically you whip out the bridge unit, use a spanner to remove the bar holder assembly, and replace with this one. Job done! You may even find that this arm fits into your exising holder, in which case you don't need to replace the whole assembly.
Some licenced floyds may have unusual sizing but this defnintely fits Floyd Rose brand bridges.
You can usually be confident of good engineering with Schaller, and that is the case here.
2
0
Report
J
Trem
Perfect replacement for the bar on my Ibanez s2170.
3
0
Report
r
excellent value upgrade
Used to replace slightly wobbly arm on an EVH wolfgang std with the FR Special. Simple to replace, with a touch of vasoline to smooth things.
Result is a snug smooth action with no play.
Perfect.
Result is a snug smooth action with no play.
Perfect.
0
0
Report
H
Original is the best
Geniune parts from Floyd Rose are the best you can buy.
Especially in this case when these parts are made in Germany.
With one word: Reliability
Especially in this case when these parts are made in Germany.
With one word: Reliability
0
0
Report
A
Well made, but not very durable.
While this bar has great weight and gives a fantastic, positive lock, the bushing, or what would be the bushing, wore out incredibly quickly. Since it's actually a small bar, and not your typical nylon bushing, you can't actually replace it. If you don't mind a little bit of wobble in your arm, it's still an excellent product.
0
0
Report
