A
Sound great and are good for the money
I am a professional Guitarist and composer for film and TV
I needed to make some extra long stereo cables to use with my metal band for running backing tracks from our interface and laptop to the front of house. I believe we made 15 meter cables in the end with one of these on each end.
The cables performed perfectly for hundreds of gigs and sounded awesome! Not once did we have a cable fail on us which is important because if the backing tracks go down then it all sounds terrible.
we used Sommer cable to make the cables with and soldered these to the ends. They are very easy to solder on and took 5 minutes each end.
They are Neutrick so you are getting the quality associated with the brand. They are really cheap - i just bought some XLRs that were almost £4 each end and this added up fast but these are nothing in comparison.
I would strongly advise making some stero cables, they come in very handy! I have used these as well to run DJ equipment Live and ipods into my PA.
Pros:
very cheap
Sound awesome
Neutrick quality
Cons:
Takes time to assemble
None
I needed to make some extra long stereo cables to use with my metal band for running backing tracks from our interface and laptop to the front of house. I believe we made 15 meter cables in the end with one of these on each end.
The cables performed perfectly for hundreds of gigs and sounded awesome! Not once did we have a cable fail on us which is important because if the backing tracks go down then it all sounds terrible.
we used Sommer cable to make the cables with and soldered these to the ends. They are very easy to solder on and took 5 minutes each end.
They are Neutrick so you are getting the quality associated with the brand. They are really cheap - i just bought some XLRs that were almost £4 each end and this added up fast but these are nothing in comparison.
I would strongly advise making some stero cables, they come in very handy! I have used these as well to run DJ equipment Live and ipods into my PA.
Pros:
very cheap
Sound awesome
Neutrick quality
Cons:
Takes time to assemble
None
0
0
Report
j
good value!
I primarily use this TRS jack for TRS->XRLm adapter cables. Many mixers give a balanced signal in the form of a TRS for the AUXs or other outputs, such as a matrix.
These are good value, solid construction. Very useful. I gave only 4 stars because they only have a crimp type cable restraint. There are other types that have better cable restraints. This one is fine for most conditions. I now only get NYS 228, a much better choice, better quality!
These are good value, solid construction. Very useful. I gave only 4 stars because they only have a crimp type cable restraint. There are other types that have better cable restraints. This one is fine for most conditions. I now only get NYS 228, a much better choice, better quality!
0
0
Report
A
It's a jack
Good quality jack, works perfectly.
0
0
Report
A
What you would expect!
I guess when you have been around audio equipment long enough you end up having favourites, and neutrik connectors are a favourite of mine. The build quality is always great and for connectors like this one they are easily attached to whatever application you need them for.
In my case i was changing over some ends on a multicore so i could easily patch a jack lead from my control room to my amp room. These did the trick and I haven't looked back since. Great build quality and great value for money. The great thing is you know the quality your getting once you buy the neuter name.
In my case i was changing over some ends on a multicore so i could easily patch a jack lead from my control room to my amp room. These did the trick and I haven't looked back since. Great build quality and great value for money. The great thing is you know the quality your getting once you buy the neuter name.
0
0
Report
J
Neutrik NYS202
I purchased these to use on a pedalboard build where only a straight jack would fit. Mainly into the rear of a G-lab looper which didn't have space for right angled jacks. The lugs are very easy to solder to and the clamps, plastic covers and screw caps are all of quality and had no failures. They are also a great price and fairly light weight which is important when using 30-40 on a pedalboard.
0
0
Report
A
I like that they are small.. I use them for switching in a home pedalboard.
0
0
Report
A
the best.
cheap, sturdy, easy to solder, easy to hold and handle, not too thick, will take every cable. Jack plugs as they should be. A couple of years ago, I did find some with a slightly sharper edge on the inside where the cable goes in. Never happened since though... (I have ordered hundreds of these)
0
0
Report
M
Great for installation work
Neutrik TRS jacks are a lot more expensive and if your doing a patchbay installation and the cables wont get too much tugging and abuse - I recommend these jacks as a cost effective solution
0
0
Report
GV
excellent value to price ratio
Excellent quality in that price range. Product is solid, only con could be lack of a strain relief. As so far I use them only for static applications, I couldn't choose better.
0
0
Report
A
Prijs qualiteit
Deze connectors solderen gemakkelijk & zijn niet duur. Ik gebruik deze kabels in een vaste opstelling, zou eerder voor neutrik gaan voor live toepassingen
0
0
Report
