Rockboard TRES 3.1 B with Gig Bag

78

Pedalboard

  • Suitable for approx. 5 to 10 effect pedals
  • Torsion-resistant and lightweight aluminium construction
  • Slotted design for easy pedal mounting
  • Made of cold-rolled sheet aluminium
  • Additional stiffening through U-shaped support brace
  • Absolutely flat, 10° angled board surface - no welded seams
  • Insert for RockBoard Module Patchbays
  • Compatible with RockBoard The Tray - universal power supply mounting solution (not included)
  • Robust black powder-coated surface
  • Mounting holes on both sides for RockBoard LED Light (Art.461657 - not included)
  • Dimensions (L x W): 522 x 236 mm
  • Height incl. rubber feet: 37 - 71 mm
  • Weight board: 1,2 kg
  • Weight gig bag: approx. 1,25 kg
  • Includes gig bag, self-adhesive hook (50 mm wide) and loop tape (25 mm wide) and cable ties

Gigbag dimensions:

  • Internal dimensions (W x D x H): 550 x 290 x 120 mm

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

Huomaa Rekisteröi tuote osoitteessa www.w-distribution.de/en/Warranty ja pidennä takuuta 4 vuoteen.
Myynnissä vuodesta Tammikuu 2018
Tuotenumero 429128
Myyntierä 1 kappaletta
Number Of Effects 10
Incl. power supply No
Effect Send/Return No
Incl. Gigbag Yes
Incl. Case No
111 €
Sis. ALV. Ei sisällä 12 € rahtikulua
Varastossa
Varastossa

Tuotetta on varastossa ja se voidaan lähettää heti.

Tietoa lähetyksestä
Arvioitu toimituspäivä Maanantai, 6.05. - Tiistai, 7.05.
1

78 Asiakkaiden arviot

4.8 / 5

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

Huomio: jotta vältymme kuulopuheisiin, epätäydelliseen tietoon tai mainontaan perustuvia arvosteluja, niitä saa tehdä vain asiakas, joka on tuotteen meiltä ostanut.

Sisäänkirjautumisen jälkeen löydät kaikki arvosteltavat tuotteet kohdasta “Arvostele tuotteita” asiakastililtäsi.

Käsittely

Työnjälki

44 Arvostelut

J
Tukeva ja kevyt!
Jönsse 27.12.2020
Täydellinen lauta omiin tarpeisiini. Kevyt ja tukevan tuntoinen. Harley Benton PowerPlant ISO-1AC upposi pohjaan kivasti ja 5 pedaalia meni heittämällä päälle väljästi asetellen. Jos haaveilee kahta päällekkäistä riviä, niin kannattaa mitata pedaalit, nimittäin ahdasta tulee.
Käsittely
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
b
Pretty damn good, some quality control issues.
benb33 21.08.2018
Received my Tres 3.1 last week, spent the weekend setting it up.
I brought it as I think it occupies a niche in the pedal board market which hasn't really been filled yet (deeper and with more space under that pedaltrain metro equivalents, but not as big a a classic junior size).
Pros: - The pedal board itself is good, solid and the middle support aids its solidity.
- easy to organise cabling
Cons: - the top and bottom rows of the pedal board are not wide enough to put 25mm loop tape on, and there is not enough supplied to attach anyway. The implication is you only attach to the middle four 25mm rows. To maximise pedal purchase and space i've bought extra tape but had to cut it out from the holes to keep it looking head and the tape sticking firmly.
- Attaching the "Tray" to hold the power supply is not possible with my Decibel 11 Hotstone deluxe. The power supply is to tall. Therefore I had to attach it using dual-lock. However it was still sticking out too much and I had to raise the front feet of the board so that its not resting on the power supply.
Also one of the rubber feet ripped off when raising the feet.
I like the board, however it's definitely not perfect.
Käsittely
Työnjälki
3
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
PN
Great pedalboard!
Piotr Nosoff 06.01.2021
Built quality is excellent, the board is sturdy but still light. The included bag is well made and really practical. On this, still reasonably small board I could fasten 7 pedals in two rows: 1st row - big Mesa bass preamp, almost as big Rodenberg boost/double overdrive and normal sized compressor; 2nd row (mostly horizontally): TC's poly tune and 3 other normal sized effect pedals. I mounted power supply to the underside - there I recommend to take out the middle support bar in order to get more space (the board is stiff enough also without that).
Käsittely
Työnjälki
1
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
G
Exactly what I needed
GAzevarl 18.03.2021
I use it for my 5 pedals and Super easy to use.

+

enough space for the power tank and for the mod

You're not limited be the classic rails, you can put you pedals wherever you want and more easily.

- there is no cons (I dont see any)
Käsittely
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

Liittyvät YouTubesta