Rockboard Pedalboard with Gig Bag 4.3

24

Pedal Board and Gigbag for Effects Devices

  • For approx. 10 to 20 effects pedals (depending on size)
  • Torsion-resistant, lightweight aluminium construction
  • Slot design for easy pedal attachment
  • Mounting holes on both sides for RockBoard LED Light (optional, not included in delivery)
  • Made from one cold-rolled aluminium sheet
  • Additional stiffening via U-shaped support struts
  • Completely flat, 10° angled board surface - no welds
  • 2 Slots for RockBoard Module Patchbays
  • Compatible with RockBoard The Tray - universal power supply attachment solution
  • Robust black powder-coated surface
  • Width: 820 mm
  • Depth: 330 mm
  • Height including rubber feet: 37 - 71 mm
  • Board weight: 2,400 g
  • With gigbag
  • Weight of gigbag: approx. 2,700 g
  • Internal dimensions of case (L x W x D): 860 x 370 x 130 mm
  • Includes self-adhesive hook tape (50 mm wide) and loop tape (25 mm wide) as well as cable ties

Note: Register your product at https://shop.warwick.de/en/warrantyregistration to extend the warranty to 4 years.

Huomaa Rekisteröi tuote osoitteessa www.w-distribution.de/en/Warranty ja pidennä takuuta 4 vuoteen.
Myynnissä vuodesta Helmikuu 2020
Tuotenumero 478249
Myyntierä 1 kappaletta
Number Of Effects 20
Incl. power supply No
Effect Send/Return No
Incl. Gigbag Yes
Incl. Case No
187 €
Kaikki hinnat sis. ALV:n
Varastossa
Varastossa

Tuotetta on varastossa ja se voidaan lähettää heti.

Tietoa lähetyksestä
llmainen toimitus. Arvioitu toimituspäivä Maanantai, 20.05. ja Tiistai, 21.05. välillä.
1

24 Asiakkaiden arviot

4.2 / 5

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

Huomio: jotta vältymme kuulopuheisiin, epätäydelliseen tietoon tai mainontaan perustuvia arvosteluja, niitä saa tehdä vain asiakas, joka on tuotteen meiltä ostanut.

Sisäänkirjautumisen jälkeen löydät kaikki arvosteltavat tuotteet kohdasta “Arvostele tuotteita” asiakastililtäsi.

Käsittely

Työnjälki

20 Arvostelut

P
Sturdy and Big!
P4nuS2k 17.04.2023
Quality is very good and it's possible to fit a lot of gear on this pedalboard. I recommend!
Käsittely
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
Z
Not perfect
ZegIkLekkerNiet 26.12.2021
The board itself is goed. But when used with the options, nothing is really good. The available mods, screws don’t fit. When used with a power supply, plugs are to close to the mod… the led light is to small for most boards. When the led is installed, board doesn’t fit in the case. When the power supply holder is used, the reusable plugs won’t come off,
The supplied Velcro is not enough for the whole board. With little extra attention this could be the perfect board!
I’m happy with my board but there are so many things that could be improved…
Käsittely
Työnjälki
2
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
GS
Light, sturdy and smart
G Sophia 08.06.2020
Bought this for a large, versatile board, where i wanted to keep accessibility to the pedals by going wide instead of large. Construction is light and sturdy and it is very easy to find a hole to pass the cables exactly where needed, to keep the board tidy.

With a Rockboard Mod 1, it is easy to keep all cables tidy even using effects loop, including the power cord for the for the power supply -- either AC cables for typical power supplies or DC cables (such as for the Ojai or Ojai R30).

The Gig Bag is simple and efficient, especially to protect the pedals from dust, for a home/studio use. For gigging, make sure that the pedalboard is transported in a safe place as the padding is light, and the pedals of the back row are not well protected from bumps.
Käsittely
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
a
Poor Quality Gigbag
amtate 19.12.2023
After only taking this out a few times, I found that the pouch had developed a tear - seemingly because I’d placed an amp lead with plug in there - which to be honest is exactly what a pouch is for!

Then last week the metal zip snapped off with hardly any pressure having been applied.

Be wary as this is a really flimsy product which offers very limited protection for the gear it houses. Although the actual board is ok, all-in-all I’m really disappointed in the quality of this and will be looking for a replacement in the near future.
Käsittely
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta