Göldo TLB2C String Bushing Bass

26

Tail Sleeve for Bass

  • Diameter: 9.5 mm
  • Colour: Nickel
Myynnissä vuodesta Helmikuu 2014
Tuotenumero 334754
Myyntierä 1 kappaletta
1,90 €
Sis. ALV. Ei sisällä 12 € rahtikulua
Varastossa
Varastossa

Tuotetta on varastossa ja se voidaan lähettää heti.

Tietoa lähetyksestä
Arvioitu toimituspäivä Maanantai, 6.05. - Tiistai, 7.05.
1

26 Asiakkaiden arviot

4.8 / 5

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

Huomio: jotta vältymme kuulopuheisiin, epätäydelliseen tietoon tai mainontaan perustuvia arvosteluja, niitä saa tehdä vain asiakas, joka on tuotteen meiltä ostanut.

Sisäänkirjautumisen jälkeen löydät kaikki arvosteltavat tuotteet kohdasta “Arvostele tuotteita” asiakastililtäsi.

Työnjälki

9 Arvostelut

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
DB
Simple yet Elegant
David B. 6946 08.04.2018
These were bought for a Harley Benton PB-50 mod project. Iwas going for the original 50's look so string through body was a must.

Since the PB-50 was ordered from Thomann it made sense to order the bushings too. The price was also better than I could find in the UK.

Very easy to fit. Once I'd position my 2 saddle bridge I bored pilot holes then flipped the bass over. A 9.5mm countersink finished the drilling. A tap with a rubber mallet saw the bushings secure.

If you want the bushings lying flush with the back of the body use a 12.5mm flat bit to the depth required (2mm I found) before using the countersink.

No "cons" were discovered. It's a very simple product that works well. Highly recommended.

You can see the finished PB-50 on bassic.de, basschat.co.uk, onlybass.com and talkbass.com. look for posts by kodiakblair.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
S
Solid and well made.
SeanMandrake 08.09.2015
Sturdy. Good quality. Appears to be a brightly plated brass. Ideal for an upgrade or, as in my case; retrofitting a bass string to a guitar. Only as deep as it needs to be so should fit thinner bodies well.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta