Doepfer A-174-2

6

Module

  • With two modulation wheels
  • The factory setting is a spring loaded wheel on the left side with bipolar voltage output (i.e. 0V in the centre position, positive voltage in the upper range, negative voltage in the lower range; voltage range approx. -5.5 V ... 0 V ... +5.5 V)
  • The wheel to the right side is without spring and has a positive voltage output (i.e. 0V in the lowest position and positive voltage when operated upwards; voltage range approx. 0...+8 V)
  • For the spring loaded wheel a voltage "plateau" around 0 V is the preset, so the output voltage is always 0 V in a small range near to the centre position
  • Width: 14 HP
  • Depth: 40 mm
  • Power requirement: +10 mA (+12 V) / -10 mA (-12 V)
Myynnissä vuodesta Elokuu 2010
Tuotenumero 253212
Myyntierä 1 kappaletta
Width 14 TE / HP
99 €
Sis. ALV. Ei sisällä 12 € rahtikulua
Varastossa
Varastossa

Tuotetta on varastossa ja se voidaan lähettää heti.

Tietoa lähetyksestä
Arvioitu toimituspäivä Maanantai, 6.05. - Tiistai, 7.05.
1

6 Asiakkaiden arviot

4.8 / 5

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

Huomio: jotta vältymme kuulopuheisiin, epätäydelliseen tietoon tai mainontaan perustuvia arvosteluja, niitä saa tehdä vain asiakas, joka on tuotteen meiltä ostanut.

Sisäänkirjautumisen jälkeen löydät kaikki arvosteltavat tuotteet kohdasta “Arvostele tuotteita” asiakastililtäsi.

Käyttö

Ominaisuudet

Työnjälki

3 Arvostelut

google translate de
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
S
Super Controller
Stratoblaster4711 09.03.2019
Ich hatte mir zwei der A-174-2 bestellt, da ich beide nebeneinander an mein Manual montieren wollte. Links ist natürlich ein Poti, das hervorsteht, aber wenn man zwei nebeneinander anreiht, funktioniert es sauber. Als linken Abschluss habe ich eben ein 2TE-Blind-Panel montiert, so kann das nächste Modul direkt angereiht werden. Von der Haptik laufen sie wirklich butterweich und genau, lassen damit sehr genaue Modulationen zu. Eines der beiden Pitchbend, die ja eine Mittelstellung haben, hatte ich die Feder entfernt. So habe ich in meiner Kombination ein drittes Modulationsrad mit einem Pitchbend erhalten.
Käyttö
Ominaisuudet
Työnjälki
2
0
Raportoi ongelmasta

Raportoi ongelmasta