C
Very handy, but beware...
Very clean solution from temple design audio, very well thought of, but a word of advice,.... don't put it to the pedal first,... big mistake,... lock it to the board first,.. where you want it to be,.. and then press the pedal on the plate,.... maybe not an issue with the pedal that needs just one plate, but for foot controllers and for example Roland gr55 synth that I use I used 4 of those plates,.... so it is next to impossible to get it to the right spot and manage to lock it firm to the pedalboard aiming all the holes..... so as I said, first put it all to the pedalboard, lock it with the supplied screws and then press the pedal/ processor /controller to it,..... now it fits perfectly,..... I wish someone told me this beforehand... I wouldn't ruin 3 perfectly good plates trying to pry it open from the controller.
I know it is cheaper to just get hook tape and put it on the pedalboard, but this really saves time, and looks very cool and professional.
I know it is cheaper to just get hook tape and put it on the pedalboard, but this really saves time, and looks very cool and professional.
5
0
Anmeld bedømmelse
A
Perfect size plate for your Audio Temple Board
These adhesive plates are perfect for any boss sized pedal, to affix to a Temple Audio board, mine is a Duo 24. Personally I recommend using 2 x medium plates for a big pedal, such as a preamp or a DI, rather than 1 x large, as rubber feet usually get in the way of the large pedal plates, in my experience anyway. Also having 2 x secure points fastening the pedal to the board seems preferable over 1.
The quality is quite high, and I cannot see it ever becoming a case where my pedals will easily become unfastened from the board. I can recommend before fastening to the board, to clearly mark out where you want your pedals to go, keeping specifically in mind, the input and output jacks of all pedals, along with power points, as you want a little bit of manoeuvrability with cables etc. Also, I'd recommend palcing the plates on the board first, and slowly lowering the pedal down on to the adhesive rather than fastening the adhesive plate first. It just seems that little bit easier.
With the medium plates, try to fix it to the bottom of the pedal, that is, where you will actually be placing most weight on the pedal with your foot.
The quality is quite high, and I cannot see it ever becoming a case where my pedals will easily become unfastened from the board. I can recommend before fastening to the board, to clearly mark out where you want your pedals to go, keeping specifically in mind, the input and output jacks of all pedals, along with power points, as you want a little bit of manoeuvrability with cables etc. Also, I'd recommend palcing the plates on the board first, and slowly lowering the pedal down on to the adhesive rather than fastening the adhesive plate first. It just seems that little bit easier.
With the medium plates, try to fix it to the bottom of the pedal, that is, where you will actually be placing most weight on the pedal with your foot.
1
0
Anmeld bedømmelse
p
I guess it does what it's supposed to, however I find that the elevation of the pedal makes it just a bit weird when you step on it. I assume if would use more that one so that you would have support on top and bottom of the pedal it would be more stable. In my case, I'll go back to velcro hook and loop.
0
0
Anmeld bedømmelse
FT
Wave velcro a bye bye
I always wanted to get rid of velcro in my pedalboard. The Temple Audio pedalboards are perfect for a guy like me, obsessed with a neat and clean pedalboard design. The final look is very professional and efficient. Tested on several pedals and on AX8 Fractal Audio.
1
0
Anmeld bedømmelse
g
Wonderful
I had doubts about these, but I got used to them fast. They stick very well (clean the pedal first of course), and are strong.
The only thing that may or may not bother anyone, is that the pedal - inevitably - will wobble just a little bit. It's not noticeable when you step on the pedal, but it's there.
The only thing that may or may not bother anyone, is that the pedal - inevitably - will wobble just a little bit. It's not noticeable when you step on the pedal, but it's there.
0
0
Anmeld bedømmelse
p
Amazing
This thinks works amazing. You can change pedals position..
0
0
Anmeld bedømmelse
G
Does the job
Fits the board nicely, they're brand new so I can't say much about the adhesive but it seems decent.
0
0
Anmeld bedømmelse
_
Great for standard size pedals
Good, practical solution for Temple Audio Design pedalboards. It will prevent your pedal from sliding around, no velcro needed, and you can reuse it (use a hair dryer or a heat gun to heat the adhesive and it will come out).
Word of advice, put the plate on the pedalboard first, and press your pedal on top of it. This will guarantee that the pedal is straight, and is absolutely needed for pedals that need more than one plate.
Use this size for MXR, Boss style pedals. Even some a bit bigger will do fine with this size.
Word of advice, put the plate on the pedalboard first, and press your pedal on top of it. This will guarantee that the pedal is straight, and is absolutely needed for pedals that need more than one plate.
Use this size for MXR, Boss style pedals. Even some a bit bigger will do fine with this size.
0
0
Anmeld bedømmelse
R
Light, sturdy and very sticky!
What's there to say? Light, sturdy and very sticky!
0
0
Anmeld bedømmelse
A
Extremely simple and effective.
Sturdy, easy to use, 100% effective. There is absolutely no cons for this product. Keeps your pedal board and pedals safe and clean.
Definitely a market changer! GENIAL!
Definitely a market changer! GENIAL!
0
0
Anmeld bedømmelse
