R
Good signal splitter
I had the need to send my guitar signal to my guitar amp and to my guitar modeller or sometimes direct to my audiointerface simultaneously. For this purpose this box works really fine without noise or signal degradation. I tested also the other way around sending a signal to either the A or B output and that worked fine too.
For the LED indicators it needs a 9V battery (the switching/routing is not affected so it can run without battery ) and in order to connect it to an 9V powersupply I bought a cheap adapter cable that connect the battery connector with a 9v plug. That works also fine because I hate batteries. Yes cheap but it works fine and it has also 4 connectors so you can send 2 sources to 2 outputs or you can send to sources to either output A or B.
Highly recommended for the purposes mentioned.
For the LED indicators it needs a 9V battery (the switching/routing is not affected so it can run without battery ) and in order to connect it to an 9V powersupply I bought a cheap adapter cable that connect the battery connector with a 9v plug. That works also fine because I hate batteries. Yes cheap but it works fine and it has also 4 connectors so you can send 2 sources to 2 outputs or you can send to sources to either output A or B.
Highly recommended for the purposes mentioned.
2
0
Anmeld bedømmelse
J
Allright for a 2 guitar rig
it works fine! still using it!
but there no indicators on which guitar u are on etc. it does amplify any noise in your rig! 60 cycle hum' etc. but its build like a tank. can't stomp it too death
but there no indicators on which guitar u are on etc. it does amplify any noise in your rig! 60 cycle hum' etc. but its build like a tank. can't stomp it too death
0
0
Anmeld bedømmelse
D
God kvalitet
Gør hvad den skal, ikke så meget ballade.
0
0
Anmeld bedømmelse
